Skip to content
Join in our WhatsApp Group for fast response!
WhatsApp Group!

Country

Holybro Kopis CineWhoop 2.5 Inch Whoop FPV Racing Drone BNF with Caddx Nebula Pro Vista Kit HD Digital System

by Holybro
SKU 6725074
Save 23% Save 23%
Original price $465.99
Original price $465.99 - Original price $465.99
Original price $465.99
Current price $358.99
$358.99 - $358.99
Current price $358.99
Shipping Methods & Delivery Times

We offer three shipping methods:
1) Free Standard Shipping - takes 7-20 working days (except remote areas) and requires a remote fee for those areas.
2) Expedited Shipping - takes 4-10 working days and requires an additional fee. Contact us if you want to use express shipping.
3) Ocean Shipping (for USA only) - takes 18-35 working days. Contact us if you want to use sea shipping.

Holybro Kopis CineWhoop 2.5 Inch Whoop FPV Racing Drone BNF with Caddx Nebula Pro Vista Kit HD Digital System

Specification: 
Brand Name: Holybro
Model: Kopis Cinewhoop 2.5
Item Name: 105.5mm Wheelbase F4 4S 2.5 Inch CineWhoop FPV Racing Drone
Version: PNF ( Without Caddx Nebula Pro Vista Kit HD Digital System Version)
Drone Wheelbase: 105.5mm
Frame Material: 3mm 3K Carbon Fiber
Weight:157g (Without Battery)
Take-off Weight: 248g (take example as 4s 850mah Lipo)

Kakute F4 V2 Mini Flight Controller
MCU: STM32F405RGT6 32-bit processor
IMU: MPU6000 (SPI)
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5 hardware UARTS (UART1,3,4, 5, 6)
128 Mbit Dataflash chip for Blackbox logging
Dimensions: 32x29x6mm (includes USB in height)
Mounting Holes: Standard 20mm square to center of holes
Weight: 4.4g
-Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. 
PPM and PWM receivers are not supported.

Tekko32 F3 4in1 35A mini ESC 4In1
F3 MCU, double the speed of F051, the MCU works at 108Mhz
32bit ESC with BLHELI32 firmware
Supports 3-6S lipo input
Default PWM output 96K
Amperage meter scale ratio has been adjusted to 185.
PWM input, TLM supported
Voltage output (VBAT)
NO output BEC
Supports Multishot / Dshot PWM
Supports damped light
Ext. cap needed for 6s (1000uf 35v for 6s usage.)
Mounting holes: 20x20mm(M3)
Size:32 x 38 mm
Weight: 8g

T-Motor F1404 3800KV Brushless Motor
Item Name: 1404 3800KV 3-4S Brushless Motor
Configuration: 9N12P
Shaft Dimeter: 1.5mm
Dimension: 17.9x16.6mm ( 9x9mm, M2 mounting hole)
Weight: 9.34g

Gemfan D63-5B Propeller
Model: D63
Item Name: 2.5 Inch 5-Blade Propeller
Quantity: 4 CW & 4 CCW
Pitch: 1.65in
Props Dia: 63.5mm/2.5''
Center Thickness: 5mm
Center Hole Dia: 1.5mm 3 holes

Caddx Nebula Pro Vista Kit HD Digital System
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p
60fps): 30-40ms
Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
Input Power: 7.4-26.4V
Nebula Pro Camera
Sensor: 1/3" CMOS
Effective Pixel: 4M
Lens: 2.1mm f/2.1
Shutter: Rolling Shutter
FOV: 150(D);122(H);93(V)
19x19x20mm

Receiver:Built-in Receiver

Holybro Kopis-cinewhoop2.5 Manual

TATTU 850mAh Battery Pack with XT30 Plug

Pacakge Included:
1x Holybro Kopis CineWhoop 2.5 Inch Frame
1x CADDX Vista Nebula Pro HD Digital System
1x Kakute F4 V2 Mini Flight Controller
1x Tekko32 F3 4in1 35A mini ESC 4In1
4x T-Motor F1404 3800KV Brushless Motor
4x Gemfan D63-5B Propeller CW
4x Gemfan D63-5B Propeller CCW
2x Propeller Guard
1x Camera Mount for Naked Gopro
1x Carrying Case
(Package doesn’t include Insta360 GO Camera and Camera Mount, on the pictures for reference only.)