SPCMAKER LEITENG115 3inch Toothpick FPV Racing Drone - BNF Version
von SPCMAKER
SKU 6911866
Ursprünglicher Preis
$152.00
-
Ursprünglicher Preis
$157.69
Ursprünglicher Preis
$152.00
$152.00
-
$157.69
Aktueller Preis
$152.00
Shipping Methods & Delivery Times
We offer three shipping methods:
1) Free Standard Shipping - takes 7-20 working days (except remote areas) and requires a remote fee for those areas.
2) Expedited Shipping - takes 4-10 working days and requires an additional fee. Contact us if you want to use express shipping.
3) Ocean Shipping (for USA only) - takes 18-35 working days. Contact us if you want to use sea shipping.
SPCMAKER LEITENG115 3inch Toothpick FPV Racing Drone - BNF Version
Specification:Brand: SPCMAKER
Model: Leiteng 115
Wheelbase: 115 mm
Flight control: SPCMAKER F4 6A AIO Whoop(1S) flight control
Motor: Galloping G1202 11000KV brush-less motor
Propeller: HQProp T 3X2-PC 3-inch propeller
Camera: CADDX Nano ANT Lite 1200TVL camera
Image transmission: 5.8g 25/400MW 40CH image transmission
Receiver: Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
Product size: 100mm*100mm*42mm
Weight: 39.8g (without receiver)
Packing size: 150x150x60mm
Weight: 185g
Motor :
Brand: SPCMAKER
Model: Galloping G1202 KV11000
Working rated voltage (Lipo): 1S
No-load current (4.0V): 1.3A
Online current: 5.31A
Power limit: 21.24W
Internal resistance between phases: 160mΩ
Lead specification: 30#AWG 48mm JST1.25
Groove rod: 9N12P
Shaft diameter: 1.5mm
Size: φ15.5*8.5mm
Weight (including wire): 3.6g
Flight Control:
MCU: STM32F411
Gyroscope: MPU6000
Screen display: AT7456E
Size: 31.5*31.5mm
Mounting hole: 25.5*25.5mm/φ3mm
Weight: 3g
BEC output: 5V 1.2A
FC firmware: MatekF411RX
ESC firmware: O_H_5
BLHeli BLHeli-S
Input voltage: 1S
Current: 6A continuous (8A peak)
Current scale: 400
Camera :
Model: Caddx Ant lite
Image sensor: 1/3" CMOS sensor
Horizontal resolution: 1200 TVL
TV system: NTSC and PAL (switchable)
Menu: Support
Image: 4:3
Synchronization: internal
Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
Signal to noise ratio: >52dB (AGC off)
Video output: CVBS
Lens: 1.8mm/F2.5
Minimum illumination: 0.001Lux
Automatic gain control: yes
BLC: Yes
WDR: Global WDR
DNR: 3D DNR
Size: 14*14mm
Wide power input: DC 3.7-18V
Working temperature: -20°C~+60C
Working humidity: 20%~80%
Weight: 1.7 grams (net weight)
VTX:
Working voltage: 5V
Output power: 25mW/50mW/100mW/200mW/400mW
Frequency: 5.8GHz 40CH
Video format: NTSC/PAL
Ratio mode
Support RCDRone OSD
Connector: UF.L (IPE-X)
Size: 15mmx15mmx3mm (without mounting holes)
Mounting hole: 16mmx16mm
Weight: 1.5g
Propeller:
Brand: HQProp
Model: HQProp T 3X2-PC
Material: PC
Length: 3 inches, about 76.2mm (mm)
Color: transparent black
Quantity: 2 positive + 2 negative = 1 set
Aperture: 1.5mm
Weight: 3.8 grams (4 pieces.)
Lightweight, strong and balanced toothpick drone
Package included:
1x Leiteng 115 kit
1X SPCMAKER F4 6A AIO Whoop(1s) flight control
1X 5.8g 25/100/200/400MW 40CH VTX
1X CADDX Nano ANT Lite 1200TVL camera
4x Galloping G1202 11000KV brushless motor
4X HQProp T 3X2-PC 3 inch propeller
1X 5.8g UFL interface rod antenna
1X Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
1X PH2.0 plug 24AWG high temperature resistant silicone wire
1X packaging color box
