HAPPYMODEL

Happymodel 1-2S Crux3 3 inch Brushless Toothpick Drone with Frsky SPI/Flysky SPI/DSM2/X SPI/RXSR/TBS Receiver Features:41gram 1-2s brushless Toothpick droneNew AIO 4in1 CrazybeeX flight controller CADDX ANT CameraNew 1202.5 brushless motorXT30 connectorRecommend to use 2s 350mah/400mah/450mah/520mah battery（battery not included）Compatible with Insta360 Go Camera You may...

Happymodel 2.4g ExpressLRS ELRS nano series receiver module PP RX/ EP1 RX/ EP2 RX Notes:Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the...

Happymodel 2.4g ExpressLRS ELRS TX module ES24TX-Lite for T-lite Introduction：Specific Lite 2.4GHz ExpressLRS TX module for Jumper T-lite is coming out now.This Lite TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and...

Introducing the Happymodel Bassline 2s FPV Racer, designed in collaboration with team pilot Nathan Loopz and now available after being conceptualized in 2019. Experience ultimate control and performance with the X12 5-in-1 AIO flight controller featuring built-in 2.4G ELRS V2.0 and OPENVTX. Long-range transmission...

Looking for a high-performance drone that can keep up with your skills and demands? Look no further than the Happymodel Bassline Digital HD 2S Toothpick Drone! Equipped with an HD Digital VTX system and powerful EX1103 KV11000 motors, this drone is built to handle...

Happymodel BeecoreX FR Brushed F4+ESC +VTX+RX+OSD Flight Controller For Inductrix Tiny Whoop E010 E010S - Frsky Receiver The BeecoreX is a ultimate flight controller for Brushed Tinywhoop , it include F4 FC, vtx , ESC, frsky receiver and betaflight OSD. It makes very easy to build a brushed tinywhoop....

Are you ready to upgrade your 65mm/75mm/85mm whoops?YES!! The Happymodel CrazybeeX built-in ESC/VTX/Frsky SPI RX/OSD will handle 1-2S battery!! Note:This product is discontinued. Important: Not compatible with big propeller like 65mm/75mm when use 2s battery . Recommend max size of propeller is 55mm. Flight...

Happymodel CrazyF4 ELRS AIO 5in1 Flight controller built-in 900MHz(915MHz or 868MHz optional) ELRS Receiver Specifications:Flight controllerMCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in Serial-based ExpressLRS...

The CrazyF411 ELRS flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed) which could support 2-4s. Bigger Mosfet could support high to 20A currents would be better for 2-4S toothpick drone or long range FPV drone. And because...

Happymodel CrossF4 ELRS 1-2S Flight Controller with Onboard UART ExpressLRS 2.4GHz Receiver Specification:Flight controllerFirmware target: CRAZYBEEF4DX4.3.2MCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: BMI270(SPI connection)Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot300 readyBuilt-in Betaflight OSD(SPI Control)Built-in UART ExpressLRS 2.4Ghz receiver(Default firmware ExpressLRS v3.0.1)Built-in...

Happymodel Crux3 1S ELRS 3inch toothpick FPV Racer Drone  Note: The Caddx peanut camera is not included, you can buy it HERE   Features:40gram 1s brushless Toothpick droneAIO Flight controller with ELRS Receiver and 5.8G VTX CADDX ANT CameraNew 1202.5 KV11500 brushless motorRecommend to use...

Happymodel Crux35 HD version CRUX35 HD is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog version and 108g for the digital HD version. The Crux35 serials drone use Happymodel EX1404 high-efficiency motor...

Happymodel DiamondF4 AIO 5-IN-1 Flight controller built-in VTX ESC OSD Receiver with Frsky/Flysky Receiver For Moblite 6/7 Specification:Flight controller(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply:...

Note: The Happymodel ELRS X1 AIO 4in1 Flight controller is no longer available. Please order the upgraded X12 ELRS V2.0   The ELRS X1 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_s ESC which could support 2-4s. Bigger Mosfet could...

The ELRS X2 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_S ESC which could support 2-4s. Bigger Mosfet could support high to 12A currents would be better for 2-4S toothpick drone or long range FPV drone. And because the 2.4GHz...

Happymodel EX0802 KV19000/KV22000/KV14000 New Brushless Motors for Tinywhoop(Pack of 4)  Happymodel EX's new 0802 whoop special motor, adhering to the consistent style of the Happymodel brushless motor with high quality and high cost performance, using tile-shaped magnets, high-precision CNC housing, high efficiency, good dynamic...

Happymodel EX1102 19000KV 1s Brushless Motor (Pack of 4) Happymodel's new EX1102 KV19000 series motor, the lighter 1102 brushless motor weighs only 2.9g, cool design, with imported NMB double bearings, step shaft double snap springs, more durable. Specifications:Mode: EX1102 KV: 19000Configu-ration: 9N12PStator Diamter: 11mmStator...

Happymodel EX1105 KV5200 Brushless Motors (Pack of 4) Specification:Brand Name: HappymodelModel: EX1105Item Name: 1105 KV5200 3-4S Brushless MotorConfigu-ration: 9N12PStator Diameter: 11mmStator Length: 5mmShaft Diameter: Φ1.5mmMotor Dimension(Dia.*Len): Φ14mm*17mmWeight: 5.7gWire length: 70mm include the connectorPlug interface: JST 1.25mm 3pinFeatures:- New design rotors- High efficiency and smooth-...

Happymodel Moblite6 1S 65mm Ultra light Brushless Whoop FPV Racing Drone Specifications:Brand Name: HappymodelItem Name: Moblite6 1S 65mm ultra light brushless whoopWheelbase: 65mmSize: 80mm*80mm*25mmWeight: 18.5g (without battery)Weight:26g(with Original 1s 300mah Lipo battery ) Features:The lightest 1s 65mm brushless whoopPowerful and efficiencyThe lightest 1s AIO...

Happymodel Moblite7 1S 75mm Ultra-light Brushless Whoop FPV Racing Drone   Specifications:Brand Name: HappymodelItem Name: Moblite7 1S 75mm ultra light brushless whoopWheelbase: 75mmSize: 97mm*97mm*25mmWeight: 19.5g (without battery)Weight:36g(with Original 1s 650mah Lipo battery ) Features:The lightest 1s 75mm brushless whoopPowerful and efficiencyThe lightest 1s AIO...

Specifications:Brand Name: HappymodelModel: Moblite7 WalksnailFrame wheelbase: 75mmWeight: 33.5 gram without batterySize: 98mm*98mm*48mmReceiver option:SPI ELRS 2.4GHzSPI FRSKY 2.4GHzCompatible with 1S Lipo battery or Lihv batteryBattery Plug: PH2.0 Flight controllerSuperbeeF4 Lite ELRS/FRSKYSPI ELRS version Firmware target: CrazybeeF4SX1280SPI FRSKY version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: MPU-6000...

The flight controller updated to CrazybeeF4 Lite v3.1 since 17th Feb 2022 ,please check the update log Notice: The flight controller of DSM2/DSMX version Mobula6 has been updated to be CrazybeeX DXS V1.0 after Dec.9th 2020 , it has built-in DSM2/DSMX spi receiver , so...

Happymodel Mobula6 ECO 2024 1S 65mm HDZero Ultra Light Micro FPV Whoop Drone ETA: Around Early April Features:AIO Flight controller with Serial ELRS ReceiverCompatible with HDZERO systemEquipment with the lightest brushless motors-SE0702 only 1.49gramHDZERO NEW ECO VTX and Camera readySmooth and powerfulCompatible for 1S...

FPV Brushless Whoop Drone Happymodel Mobula6 ELRS Overview ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are about to release Mobula6 equipped with...

Happymodel Mobula6 HD 65mm Crazybee F4 Lite 1S Whoop FPV Racing Drone BNF w/ Runcam Split3-lite 1080P HD DVR Camera Compatible Frsky D8 Receiver Specifications:Brand Name: HappymodelItem Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF versionWheelbase: 65mmSize: 80mm*80mm*40mmWeight: 27gReceiver option:Internal SPI Frsky...

The Happymodel Mobula6 HDZero is the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only! Don't miss out on this amazing deal!Get the Mobula6 HDZero for only $170 with code MAR29Promotion ends soon! Specifications:Brand Name: HappymodelModel: Mobula6 HDZERO Frame wheelbase: 65mmWeight:...

Mobula7 1S HD version is a light and efficiency 75mm brushless whoop which provide 1080P HD video record function. A highly integrated AIO Flight Controller, supports ESC with a maximum current output of 12A. We added blackbox for this 1s 75mm HD recorder whoop....

2022 New Happymodel Mobula7 1S Micro FPV Drone with RS0802 KV20000 Motors Runcam Nano3 Camera We’re glad to launch our new Mobula7 drone, this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless...

Happymodel Mobula7 HDZero 75mm HD FPV Brushless whoop BNF Version w/ELRS Receiver Features: Made in Collaboration with Happymodel and HDZeroEX1102 9000KV Brushless MotorsGreat for Indoor HD FPV RacingRunCam Nano HDZero CameraExpressLRS v2.0 Pre-InstalledSmooth and Powerful FlightHDZero Whoop VTXUltralight- Only 40g75mmm Whoop Description:Brand: HappymodelModel: Mobula7 HDZeroItem Name:...

Happymodel OVX300 and OVX303 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) OpenVTx aims to provide firmware with both the SmartAudio and Tramp protocols. Either protocol can be used on the flight controller and on VTx power up...

Specifications:Brand Name: HappymodelItem Name: Pancake 2-6S AIO flight controllerBetaflight firmware target: CRAZYBEEF4SX1280VTX antenna: U.FLReceiver antenna: Ceramic antennaWeight: 5.2gBuilt-in SPI ELRS 2.4GHz receiverBuilt-in OPENVTX max power up to 400mwCompatible with 20×20 or 35.5×35.5 4-IN-1 ESC Flight controllerFirmware Target: CRAZYBEEF4SX1280MCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU6000 (SPI connection)Mount...

Happymodel SE0702 KV23000 KV26000 KV28000 Brushless Motors for 1S FPV Brushless Whoop The new appearance 0702 brushless motor has been released, and it will be shipped gradually from May 2023.The lightest brushless motors all over the world , the weight is only 1.46gram.You can...

Happymodel Superbee F4 Lite AIO Flight Controller ELRS/Frsky Version for 1S Tiny Whoop Drone Specification:Flight ControllerSuperbeeF4 Lite ELRS/FRSKYSPI ELRS version Firmware target: CrazybeeF4SX1280SPI FRSKY version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)Built-in...

Happymodel SuperX ELRS AIO 5-IN-1 Flight controller for Mobula6 2024 Specification:Flight controllerSuperX ELRS AIO 5-IN-1 Flight controllerMCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4Sensor:BMI270(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mw (MSP control)Built-in UART...

ETA: Around May 10th. Notes: Before buying this flight controller, make sure you have good soldering skills and can solder tiny pads. Any flight controller failure caused by welding errors is not covered by the warranty. The motor plugs didn’t pre-solder in our factory....

The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver...