0-30 USD Products

Gemfan Halloween 51466 V2 Three Blade Propeller(Pack of 12) Specifications:Inch:5.1"Pitch:3.6"Weight:3.79g/ per prop (No Battery)Material: PolycarbonateColor:Orange,Black（Total 3 patterns）Drone: FreestyleMounting:M5 Packge Including:6xCW Gemfan 51466 Propeller(Each pattern 2*CW)6xCCW Gemfan 51466 Propeller(Each pattern 2*CCW)

Gemfan Hurricane 3016-3 Toothpick Propeller(16pcs) Specification:Brand:GemfanMaterial:PCWeight:1.18gPitch:1.5inProps Dia:76.5mmCenter Thickness:5.5mmCenter Hole Dia:1.5mm Adaptive Motor:1108-1303Recommended Motor:1303 5000kvColors: Clear Grey, Blue, Purple, Yellow Package Included:4*Clear Gray (2CW+2CCW)4*Blue (2CW+2CCW)4*Purple(2CW+2CCW)4*Yellow(2CW+2CCW)

Gemfan Hurricane 51366-3 Blades 5inch MCK ReV3 Propeller  Features:A new generation of racing bladesDesigned for 6S high KV motorsResponsive, fast accelerationFind the balance between the best control and the fastest speed, increase the overall strength of the blade, so that it has better grip...

Gemfan Hurricane 51433 Propeller for FREESTYLE (Pack of 24pcs) Specifications:Blades:3Material:PCPitch: 3.5inchProp Disk Diameter: 129.7mmCenter Thickness: 6mmCenter Hole Inner diameter: 5mm Max Prop Width:14.3mmWeight: 3.8gAdaptive Motor:2206-2306Colors: Transparent, Clear black, Orange, Purple, Pink, Yellow Package included:4x Gemfan Hurricane 51433 Propeller -  Transparent4x Gemfan Hurricane 51433 Propeller -  Clear...

Gemfan Hurricane 51466 Propeller (Set of 8) Get ready to race with Gemfan's Hurricane 51466 Durable 3-Blade Propeller. The 51466 Hurricane series was designed for agile flight at high speed with its incredibly low weight at just over 4g.Compared to the 51499 Hurricane, the...

GEMFAN HURRICANE 51477 3 BLADE PROPELLER Specifications: Blades: 3 Material: PC Pitch: 4.7inch Prop Disk Diameter: 129.5mm Center Thickness: 7mm Max Prop Width: 14.08mm Weight: 4.15g Adaptive Motor: 2205-2306 Colors: Yellow, Blue, Clear Black, Red, Purple Package Includes: 4XCW Propellers 4XCCW Propellers

Gemfan Hurricane 5236-3 5 Inch 3-Blade Racing Propeller Powerful for RC Drone FPV Racing(Pack of 16) Features:Racing Propeller; Faster, more aggressive and powerful than normal 5/5.1 inch Specification:Brand Name: GemfanModel: Hurricane 5236 Material:PCPitch: 3.6inProp Dia: 134.1mmCenter Thickness: 6mmCenter Hole Dia: 5mm Colors: Clear Gray, Orange, White, PurpleWeight: 3.9g Package Included:2CW + 2CCW Clear Gray2CW +...

Gemfan Hurricane 7050-3 Durable Tri-Blade 7″ Proprller(Pack of 8) SpecificationsInch: 7inProp Pitch: 5inWeight: 8.9gCenter Hole Diameter: 5mmProp Disk Diameter: 178.4mmCenter Thickness: 7mmMaterials: PCShaft: M5Package Included:4X CW 7050-3 Proprller4X CCW 7050-3 Proprller

GEMFAN Hurricane Max 51377 3 Blade 5inch Propeller(Pack of 8) Specifications:Inch: 5in    Pitch: 3in   Weight: 4.5g    Center Hole Inner diameter: 5mmRecommended Motor: 2207 2100kvProp Disk Diameter: 129.7mmCenter Thickness: 6.1mmMax Prop Width: 14.7mmMaterials: PCAdaptive Motor: 2205-2306 Package Included:4 X CW Gemfan Hurricane 51477 3...

GEMFAN Hurricane SL 6026-PC 1.5mm propeller for 2004-1700kv(Pack of 8) Specification:Brand name: GemfanItem type: 6026Rotation: CW CCWMaterial: PCPitch:2.6 inch  Prop Disk Diameter:153mmCenter Thickness:5.5mmCenter Hole Inner diameter:Three holes 1.5mmMax Prop Width:15.5mmWeight/g:3.04gRecommended Motor:2004-1700KV MotorColor: Whiskey,White,Gray Packing Included:4CW+4CCW Whiskey PropellerOr 4CW+4CCW White PropellerOr 4CW+4CCW Gray Propeller

Gemfan X Street League 7043-3 Blades 7inch Propeller for 2205 Motor (Pack of 8) Specifications:Size: 7 inchesPitch: 4.3inWeight: 10.3gCenter Hole Dia: 5mmColor: pink, yellow, black, whiskyRecommended motor: 2205Props Dia: 178.9mmCenter Thickness: 7mmMaximum paddle width: 20mmMaterial: PC Package Included:4 x CW Propellers4 x CCW Propellers

GAONENG 3500mAh 7.6V 2S LiPo LiHv Battery Pack with XT30 Plug for Frsky ACCST Taranis Q X7 Transmitter Remote Controller Specification:Item: GAONENG 7.6V 3500mAh 2s LiPo BatteryCapacity: 3500mAhSize: 88mm*50mm*14mmWeight:125gCaution:Don't over-charge, or over-discharge batteriesDon't put it beside the high temperature conditionDon't throw it into fireDon't...

GNB 4pcs 650mAh 1S 3.8V HV LiPo Battery 60C with JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV DroneDescription:Item: 650mAh HV 1S Lipo BatteryCapacity: 650mAhVoltage: 3.8VContinuous Discharge Rate: 60CCapacity: 650 mAhDimension: xx * xx * xx mmWeight: xxg/per...

GNB 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60/120C 3.8V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Drone Blade Inductrix Features:The connector plug: JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPXThis is newly developed chemistry for a longer lifetime and safer charging...

GNB GAONENG 3.8V 660mAh 90C 1S LiPo Battery PH2.0 Plug(Pack of 4) Description: Brand: Gaoneng GNB Name: 3.8V 660mAh 90C 1S Lipo Battery Capacity: 660mAh Discharge Rate: 90C Weight: Approx 15.5g Size: 58*18*7.8mm Plug: PH2.0 Plug Color: As Shown Note: Due to the difference between...

GNB GAONENG 660mAh 1S 3.8V HV 90C LiPo Battery GNB27(Pack of 4) Specifications: Capacity: 660mAhVoltage: 3.8V 1SDischarge: 90C Constant, 180C BurstWeight: 16gDimensions: 18mm(L) x7.8mm(W) x58mm(H)Discharge Plug: GNB27Package Includes:4x GNB 660mAh 1S 3.8V HV 90c LiPo Battery GNB27

GNB/GAONENG 2S Lipo Battery 7.4V 5000mAh XT60 Plug Remote Controller Battery for RadioMaster TX16S Radio Transmitter Jumper T12 T16 T18 T8SG Series TransmitterFeatures:Item: 2S 7.4V 5000mah Lipo BatteryDimension: 97mm*54mm*26mmWeight:g/per unitCapacity: 5000mAhConnector: XT60 plug and JST-XH 3pin plugCompatible with Jumper T12 T16 T18 T8SG Series transimitter...

GNB/GAONENG 300mAh 1S 3.8V HV 60C  Cabled Lipo Battery with Outline PH2.0 Connector (pack of 6) SpecificationCapacity:300mAhConfiguration:1S1PNominal Voltage:3.8VDimension:6.5*11.5*50mm Appr.Weight:10g (+/-1g)Max cont. discharge (C-rate/current):0CMax Burst (C-rate/current):180CCharge Connector:PH2.0Working Temperature Charge:0~45°CWorking Temperature Discharge:(-20~60°C)Working Humility:65%RH +/-20%Storage Temperature:(-20~35°C)Storage Humility:65%RH +/-20%Life Cycle:300+ times Package Included:6*GNB 3800mAh 1S 3.8V HV 60C battery 

GNB/GAONENG 300mAh 1S 3.8V HV 60C battery with Head cover Molex 1.25 Connector(Pack of 6) SpecificationModel No.:GNB3001S60AHVCapacity:300mAhConfiguration:1S1PNominal Voltage:3.8VDimension:6.5*11.5*51mm Appr.Weight:10g (+/-1g)Max cont. discharge (C-rate/current):60CMolex1.25 Connector Package Included:6*GNB 300mAh 1S 3.8V 60C battery

GNB/GAONENG 300mAh 1S 3.8V HV 60C Battery with Head Cover PH2.0 Connector(Pack of 6) SpecificationModel No.:GNB3001S60AHVCapacity:300mAhConfiguration:1S1PNominal Voltage:3.8VDimension:6.5*11.5*51mm Appr.Weight:10g (+/-1g)Max cont. discharge (C-rate/current):60CPH2.0 Connector Package Included:6*GNB 300mAh 1S 3.8V 60C battery

GNB/GAONENG 350mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector(Pack of 6) Specifcation:Item:350mAh HV 1S Lipo BatteryRate: 30CDimension: 0.25*0.45*2.79 inch（L*W*H）Weight: 8.5g/per unitCapacity: 350mAh Package Included:6*350mAh HV 1S Lipo Battery  

GNB/GAONENG 380mAh 1S 3.8V HV 90C Cabled Lipo Battery with GNB27 Connector(pack of 2/6) SpecificationModel No.:GNB3801S90WHVCapacity:380mAhConfiguration:1S1PNominal Voltage:3.8VDimension:7*17*50mm Appr.Weight:10g (+/-1g)Max cont. discharge (C-rate/current):90CMax Burst (C-rate/current):180CCharge Connector:GNB27Discharge Connector:GNB27Working Temperature Charge:0~45°CWorking Temperature Discharge:(-20~60°C)Working Humility:65%RH +/-20%Storage Temperature:(-20~35°C)Storage Humility:65%RH +/-20%Life Cycle:300+ times Package Included:6*GNB 380mAh 1S 3.8V HV 90C battery 

GNB/GAONENG380mAh HV 1S Lipo Battery FPV Battery 60/120C 3.8V with PH 2.0 Powerwhoop Connector for Tiny Whoop Drone Blade Inductrix(Pack of 6) Features:The connector plug: PH 2.0 AKA High current ultra micro, Powerwhoop, mCPXThis is newly developed chemistry for a longer lifetime and safer...

Specification:Capacity: 530mAhConfiguration: 3S1PNominal Voltage: 11.4VDimension: 19*17*65mm Appr. (H*W*L)Weight: 38g (+/-3g)Max cont. discharge (C-rate/current): 90CMax Burst (C-rate/current): 180CCharge Connector: JST-XH 4PDischarge Connector: XT30Working Temperature Charge: 0~45°CWorking Temperature Discharge: (-20~60°C)Working Humility: 65%RH +/-20%Storage Temperature: (-20~35°C)Storage Humility: 65%RH +/-20%Life Cycle: 300+ times Package Included:1*530mah 3S 11.4V battery

GT2 Competition FLYBALL Soccer Drone GT2 is the upgraded version of the F1 Pro. The redesigned shell reduces wind resistance, enhancing the performance of the GT2. Additionally, the controller has been upgraded. Features One-Click Takeoff and Landing: Simplify your flight operations with easy takeoff...

Reasons to Buy GT2 Mini The GT2 Mini Competition FLYBALL Soccer Drone Football is designed with a range of innovative features to provide an exceptional flying experience. Especially suitable for educational drone lessons and competitions. Key Features Of GT2 Mini Modular Battery Design: Easy...

Take drone soccer to the next level with our high-performance drone designed specifically for youth competitions and STEAM education. Featuring durable, impact-resistant construction and powerful brushless motors, it offers precise control, agile flight, and customizable RGB lighting—perfect for competitive matches and hands-on learning experiences....

Happymodel 2.4g ExpressLRS ELRS nano series receiver module PP RX/ EP1 RX/ EP2 RX Notes:Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the...

Happymodel 2.4g ExpressLRS ELRS TX module ES24TX-Lite for T-lite Introduction：Specific Lite 2.4GHz ExpressLRS TX module for Jumper T-lite is coming out now.This Lite TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and...

Happymodel 3K Carbon Fiber Glass Frame for Crux3 Specification:Brand Name: HappymodelWheelbase: 115mmWeight: 5.8gThickness: 2.5mm Package Included:1*frame

Happymodel 65mm Frame for Mobula6 2024 / Mobula6 ECO 2024 Features:Mobula6 2024 new frame is a ultra lighter65mm size Brushless Tiny whoop Frame.Compatible most of the 0603/0702/0802 brushless motor. It’s very soft and durable. Specifications:Wheelbase:65mmWeight:2.8gColor option: Transparent black and Transparent whiteRecommend part list:Propellers: 31mm...

Happymodel 75mm V4 Upgrade Whoop Frame for Moblite7 Mobula7(Pack of 2) Features:Does not block the USB PortLower FC Mount positionMore durableUltralightSpecification:Compatible with: Moblite7 and Mobula7Brand Name: HappymodelColor: Transparent WhiteMax propeller: 40mmWheelbase: 75mmWeight: 5.4gram Package Included:2*V4 Frame

Happymodel New 85mm Mobula8 frame durable, low position FC mountedSpecifications:Brand Name: HappymodelWheelbase: 85mmWeight: 11.5gramColor: Transparent blackMax propeller: 51MMSuitable both 3 hole mount 702/703/802/1102 motors and 4 hole 1002/1102/1103 motors Package Included:2* 85mm Mobula8 frame

Happymodel Camera Canopy for Crux3 & Mobula8 Description:Brand Name: HappymodelItem Name: Camera Canopy for Crux3 & Mobula8Material: ABSColor option: Transparent blackCompatible with CaddxFPV ANT cameraNet Weight: 1.2gPackage Included:1 x Camera Canopy2 x Screws for Caddx FPV ANT

Specification:Item Name: Camera Canopy for Mobula6Material: PPNet Weight: 1gCamera angle could adjustable easilyColor option:White,Black Package Included:1*Camera Canopy

Happymodel Camera mount bracket for Mobula6 2024 Specification：Brand Name: HappymodelItem Name: Camera mount bracket for Mobula6 2024Material: PPColor option: Transparent blackNet Weight: 0.62gCamera angle could adjustable easilyBest for Mobula6 2024 Package Included:1 x Camera mount bracket2 x M1.2×5 screws

The World first true diversity 2.4 GHz ExpressLRS Rx with RF amps Remark:The EP1 Dual Receiver has update new version. Specification:Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RXESP32 PICO D4, dual SX1280(SX1281)Antenna connector: IPEX MHF 1/U.FLRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: >19dbmReceiver protocol: CRSFInput voltage: +5V DC @ “+” padPCB size: 19mm x 14mmWeight: 1gram exclude antenna Firmware:ExpressLRS v3.0.0 rc1 or latest versionTarget: Unified_ESP32_2400_RX, Append configuration -Generic ESP32 2.4Ghz Diversity RX(EP1 Dual target will be available soon)Firmware update via UART or WIFI Package Included:1*EP1 Dual Receiver2*Antenna

This is a nano sized receiver for the ExpressLRS ELRS system.   The EP1 TCXO uses a temperature conpensated crystal oscillator which means accurate MCU clock frequency for improved performance and reliability of your RC link. The EP1, EP2, and EP1Dual modules are based on...

Happymodel ES900 DUAL RX ELRS Diversity Receiver 915MHz 868MHz Long Range Receiver Specification:Type: 915MHz/868MHz true diversity receiverESP32 PICO D4, dual SX1276Antenna connector: IPEX MHF 1/U.FLRF Frequency: 915MHz or 868MHzTelemetry power: 17dbmReceiver protocol: CRSFInput voltage: +5V DC @ “5v” padPCB size: 21.5mm x 16mmWeight: 1.5gram exclude...

Specifications:Item: Happymodel EPW6 TCXO 2.4GHz pwm receiverESP8285, SX1280/1281Antenna connector: IPEX MHF 1/U.FL6x PWM outputsRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: 12dbmReceiver protocol: PWM or CRSFInput voltage: +5v~8.4vPCB size: 19mm x 17.5mmWeight: 1.49g / antennaFirmware:Target option1: Generic ESP8285 6xPWM 2.4Ghz RX  PWM receiver via 1~6 PWM outputsTarget option2:HappyModel_EP_2400_RXCRSF Serial receiver via TX and RXFirmware...

Happymodel ExpressLRS module V2 ES900TX/ES900RX Long range ELRS hardware 915mhz support instead ES915TX/ES915RX Notice: The New version ExpressLRS hardware 868MHz/900MHz TX and RX module—ES900TX and ES900RX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the...

Happymodel Mobula6 ELRS 1s 65mm Frame Green(Pack of 2) The frame is for Happymodel Mobula6 ELRS Racing Drone Package Included:2*65mm Frame

Specifications:Brand Name: HappymodelMaterials: PAWeight: 5gColor: blackSuitable for mount DJI o3 Air unit and Vista module Package Included:1X Mount bracket

Happymodel Moxon 2.4GHz Antenna for ExpressLRS TX Module SMA Plug for ES24TX Series TX Specification:Frequency (MHz):2400.0Efficiency (dBi):-2.94Gain (dBi):4.18Efficiency (%):50.77Directivity (dB):7.12Peak Gain Position (Theta):0.00Peak Gain Position (Phi):270.00Weight(gram): 5.83Length(mm)*width(mm):69*45Plug type: SMA Package Included:1*Moxon 2.4GHz antenna

Happymodel OVX300 and OVX303 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) OpenVTx aims to provide firmware with both the SmartAudio and Tramp protocols. Either protocol can be used on the flight controller and on VTx power up...

Hawkeye 4K Thumb 2 Action Camera Pet Camera SONY 12MP 5-23V 34.5g Feature:Magnetic designGyroflow video smoothBattery for 100min Support AV outWiFi previewWide 5-23VOnly 34.5g RC remote control Specification:Model: Hawkeye 4K Thumb 2Sensor: SONY 12MPField of View: FOV 170Video Resolution: 4K 50/30FPS, 2.5K 4:3 50/30FPS, 2.5K16:9...

Features：4K 60FPSOnly 34g weightAmbarella H22S85 chipsetGyro 4.0 Image StabilizationWiFi + BT4.1 Remote controlSONY IMX377 12 Mega WDR CMOS Do you want to buy Hawkeye Firefly X LITE II Camera?Click here Note: Wifi password:12345678 Firefly X Lite FPV Cam firmware upgrade instructions You can download file from here:  Firefly...

Hawkeye Firefly X Lite I/II FPV Camera parts ND16 Filter/Shell+Bracket/Lens Module/Mainboard/WIFI Board etc 1.ND16 Filter2.Shell+Bracket3.Lens Module for X Lite FPV Camera4.Mainboard5.WIFI Board6.2P Power Supply Terminal Cable7.Lens8.Lower the voltage Cable9.Lens Module for X Lite II FPV Camera Remark:Above these parts for Firefly X Lite and X Lite II FPV Camera are same,Except the Lens Module and mainboard...

Hawkeye Firefly X LITE II 4K 60FPS 2.7K 60FPS SuperView 2.5K 60FPS EIS FPV Camera Upgrade Version GYROflow Guide on V1:Features：4K 60FPSOnly 34g weightAmbarella H22S85 chipsetGyro 4.0 Image StabilizationWiFi + BT4.1 Remote controlSONY IMX577 12 Mega WDR CMOS Support Gyroflow v1.0 and RS go...

Hawkeye Remote Control Cable for Hawkeye Split Camera Hawkeye Naked Camera and Hawkeye Thumb Camera 1. The remote control cable can be used for Hawkeye split cam,Hawkeye naked cam, Hawkeye thumb cam. The thumb cam has no photo pin, so let that pin NULL. 2....