CineBee 75HD 2S-3S Whoop(Turtle V2) White
iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design, carrying a 1080p (up to 60fps) micro cam stack and recording JELLOFREE footage flying through smallest gaps and spots. If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-4S.
Our target was pretty clear, create a lightweight, durable but jellofree whoop that can shoot high-quality HD videos. We decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keep your props in a good condition, and you won't have to worry about jello!
- Ultra-light but high performance
- JELLOFREE durable carbon/plastic construction
- No props or prop guards in view
- Upgradeable, versatile, futureproof
- Total Dimensions: 110x93x30mm
- Frame Wheelbase: 75mm
- Build Weight: 66.2g
- SucceX Micro 16x16 Tower 2-4S
- iFlight 1103 motors (1.5mm shaft)
- Caddx.us Turtle v2 HD FPV cam
- Gemfan 1635 40mm 4 blade
- iFlight Prop Guards 40mm
SucceX Mirco F4 Flight Tower System 16x16mm
SucceX F4 Flight Controller
-Input voltage 2-4S LIPO
-2x UART ports
-4x motor outputs
-No Blackbox FLASH
-BEC 5V 2A cont.
-Mounting holes: 16*16
-BF target : MATEKF411
SucceX Mirco 12A Brushless ESC
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Mounting hole 16*16mm
SucceX Mirco VTX
-Power : PIT/25/100/200mW
-Antenna interface : IPEX (UFL)
-Telemetry: IRC Tramp
-Mounting holes: 16*16mm
Motor kV Variants:
-We offer several motor setups to fit your desired performance, equipment or just preference.
-(2S), (3S) will be available.
SD card insert and ejection:
-The HD cam PCB is conveniently placed under the frame, protected by a cover.
-To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.
VTX control implementation:
-VTX can be conveniently set up in your OSD.
Receivers available currently:
1x iFlight CineBee 75HD Frame Kit
1x SucceX Micro 16x16 F4 Flight Control
1x SucceX Micro 12A 4in1 BlheliS ESC
1x SucceX Micro 200mW switchable VTX
4x iFlight 1103 2-3S motors
1x Caddx.us Turtle v2 HD FPV Cam
1x PNP or BNF Version (option)
4x Gemfan 1635 40mm 3-blade 1.5mm Props
4x iFlight Prop Guards 40mm white
2x iFlight 10*100mm magic battery straps black
1x set of accessories
Please note: There is no battery included in the package. If you want to add some check out 2-3s batteries.