Crazepony 1S LiPo LiHV Charger Board with JST and Micro Losi Cable

by Crazepony
$14.25

Crazepony 1S LiPo LiHV Charger Board with JST and Micro Losi Cable for Blade Inductrix and Tiny Whoop

This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger port to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn solid until the battery is fully charged. Once charged, the LED will turn flashing and you can remove your 1s battery and fly!

Specification:

Weight: 50g
​Dimensions: 80 x 50 x10 mm

Input Voltage: 6-20V

​Input port: Two methods, DC 12V/3A Adapter, XT60 LiPo Battery or Adapter
Output port: USB 5V/2.4A
Charge port output: Selectable 200mA and 600mA, Max charge power: 2.5W
4.20V cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35V cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter with XT60 Plug
Digital Display:
INP/xxV: Input voltage
CH1.....CH6/xxV: Inserted battery voltage
USB/xxV: USB output voltage
LED Indicators:
Green Flashing slowly: 4.20V selected
Green Flashing rapidly: 4.35V selected
Green Solid: Battery Charging
Green turn Flashing from Solid: Full Charged

You recently viewed

Clear recently viewed

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
Become a member and save $3 storewide! Register or Login.