Skip to content


GEELANG LIGO78X 4S Cinewhoop FPV Racing Drone with Gopro6/7 Bare Metal Cover and Camera Mount

SKU 6630144
Sold out
Original price $199.99
Original price $199.99 - Original price $199.99
Original price $199.99
Current price $161.99
$161.99 - $161.99
Current price $161.99
Receiver: TBS NANO Receiver version
Shipping Methods & Delivery Times

We offer three shipping methods:
1) Free Standard Shipping - takes 7-20 working days (except remote areas) and requires a remote fee for those areas.
2) Expedited Shipping - takes 4-10 working days and requires an additional fee. Contact us if you want to use express shipping.
3) Ocean Shipping (for USA only) - takes 18-35 working days. Contact us if you want to use sea shipping.

GEELANG LIGO78X 4S Cinewhoop FPV Racing Drone with Gopro6/7 Bare Metal Cover and Camera Mount

Adopt SIF4 1.0 flytower flight controller to support 2-4s lithium battery power supply, independent four-in-one 13a ESC. The integrated Betaflight OSD function keeps abreast of the signal of the flight voltage receiver and can observe the status in real time while flying. With 16m chip black box, it is more convenient to adjust the machine for analysis.
*A more compact design is adopted for the first time, with a wheelbase of 78mm. However, passing long-term flight tests will not affect flight efficiency at all. The FPV end adopts CADDX ANT lite camera, the image quality is clear. The complex environment of flying indoors has better observation and controllability.
*The 4s power supply and 2-inch ducted four-blade propeller have been tested and matched for a long time and have good operability and durability. It is recommended to use 4s 450mah battery, if you need more residence time, you can add 4s550mah battery. Through continuous improvement, the problem of low efficiency of the 2-inch air duct machine was finally solved. Indoor small cross aerial photography becomes a reality. In order to better protect the outer ring, EVA sponge material is used to improve safety and reduce wind resistance. Through some modeling optimizations, the performance is very good.
*Independent use of multiple versions of the receiver, electronic control is more stable. The flight control adopts the newer version of Betaflight 4.2, and the ESC adopts the 16.77 version. Both the two-way DSHOT mode and the gyroscope RPM filter are turned on to make the flight control more stable.
*Using 1204kv 5000 motor and 2020 ducted four-blade propeller 3-4s power supply, the efficiency ratio is super high. Flight control stability
*The whole machine is controlled at 90 grams, which solves the weight problem of traditional ducting machines and is flexible in control.
*Package includes gopro6/7 bare metal cover and camera mount, users do not need to purchase separately
*Compared with 3-inch and 2.5-inch air duct machines, the air duct is smaller and the flight efficiency is not affected. By installing the lightweight GOPRO bare metal, it is very suitable for professional video photographers.

Brand Name: GEELANG
Mode Name: LIGO78X GOPRO
Item Name: 4S 78mm Ducted CineWHOOP drone BNF
Wheelbase: 78mm
Size: 119x132x23mm(Camera mount not included)
Weight: 90g(Camera mount not included)
Weight: 166 g(With 4s450 battery, GOPRO 6 Naked camera )
Recommended battery: 4s 450, 4s 550 mah lithium battery

Spare parts specifications:
Motor Mode:GL1204 KV5000
Stator specifications:D12 * H4 0.2mm
Stator Diamter:12mm
Stator Length:4mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ16.0mm*15.8mm
Magent specifications: N52H
Shift specifications: 2mm High strength steel
Bearing Specifications: d2*D5*H2.5 MR52zz Japan ISC Custom made
WindingSpecifications:180℃ Class Multiple oxygen-free copper
No.of Cells(Lipo):3S-4S

Flight controller
Flight controller:SI-F4FC V1 Three-in-one tower Version:MATEKF411
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Store:Onboard black box
Board size:21 * 21MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 480
Built-in 5V 2A BEC
Built-in voltage detection

Onboard 4in1 ESC
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 13A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: G_H_30_REV16_77.HEX
Default protocol: DSHOT600

Frsky XM+ Non-EU Receiver Version
SBUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware upgrade-able, can be upgrade to EU with RSSI

Frsky AC900 Receiver Version
Three-in-one receiver
SBUS receiver
Frsky D16 futaba s-fhss switchable
Compatible Non EU transmitter both D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Flysky Receiver Version
IBUS receiver
Protocol: AFHDS-2A
Channels: 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support

TBS NANO Receiver version
CRSF Protocol , Official TBS transmitter compatible
Protocol: CRSF
Channels: 8ch Failsafe support
Support receiver hardware rssi function
No ground interference (Transmitter and receiver 1 m from the ground): 500m

PNP Receiver version
Support any bus and other protocols, users can install by themselves

5.8G VTX
Power switching: third gear(25MW /100MW /200MW)Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Weight: 2.0g

Model:Ant lite
Image Sensor:1/3" CMOS Sensor
Horizontal Resolution:1200 TVL
TV System:NTSC and PAL switchable
IMAGE: 4:3
Electronic Shutter
PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio:>52dB (AGC OFF)
Video Output:CVBS
Lens:1.8mm / F2.5
Min. Illumination:0.001Lux
Auto Gain Control:YES
WDR:Global WDR
Wide Power Input:DC 3.7-18V
Work Temperature:-20℃~+60℃
Work Humidity:20%~80%
Weight:1.7g (N.W.)

Gemfan D51 (2020-4) Cinewhoop props
Material: PC
Weight: 0.91g
Pitch: 2 inches
Prop diameter: 50.3 mm
Center thickness: 4.5mm
Center hole diameter: 1.5mm 3 holes

Battery recommended
Species : lipo/lipoHV
Continuous Discharge Rate: 60C
Instantaneous discharge rate: 80C

Package Includes:
1*78mm 3D printing combined diy frame
1*3D printed GOPRO 6\7Naked camera caset
Option1: SIF4 1.0 FC external Frsky NON-EU/ EU-LBT xm+ receiver
Option2: SIF4 1.0 FC external Frsky \FUTABA AC900 receiver(Multi-mode receiver)
Option3: SIF4 1.0 FC external FLYSKY receiver
Option4: SIF4 1.0 FC external TBS NANO receiver
Option5: SIF4 1.0 FC PNP NO RX receiver
4*GL1204 KV5000 Motor
1*2020 propeller(4cw+4ccw)
1*5.8G VTX5840
1*Screwdriver removal tool
2*Battery magic strap
1*USB 90°adapter plug
1*Caddx Ant lite
1*4s 450mah lihv