We offer three shipping methods: 1) Free Standard Shipping - takes 7-20 working days (except remote areas) and requires a remote fee for those areas. 2) Expedited Shipping - takes 4-10 working days and requires an additional fee. Contact us if you want to use express shipping. 3) Ocean Shipping (for USA only) - takes 18-35 working days. Contact us if you want to use sea shipping.
Happymodel Mobula8 comes with X12 series flight controller, EX1103 KV11000 motor and Gemfan Hurricane 2023 tri-blade propeller, which has excellent power performance and extremely smooth flight.
Powerful Performance and Compact Design The Happymodel Mobula8 is a micro FPV whoop drone that delivers an exhilarating flying experience. With its 1-2S capability and lightweight 85mm frame, this drone offers both power and agility., the Mobula8 is designed to provide endless fun.
High-Performance EX1103 KV11000 Motors Equipped with the impressive EX1103 KV11000 motors, the Happymodel Mobula8 offers exceptional speed and responsiveness. These motors ensure smooth and precise control, allowing you to perform daring maneuvers and achieve thrilling flight experiences.
Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw ELRS V2.0 (Default), provide firmware to support ELRS V3.0 EX1103 KV11000 motors CaddxFPV Ant FPV camera Smooth and powerful Compatible for 1S-2S Lipo/LIHV battery Recommend 2S 450mah/550mah/650mah battery (Not include)
Receiver option: 2.4G ELRS SPI (Support ELRS v2.0, provide firmware could compatible with elrs v3.0) SPI Frsky D8/D16 not compatible with EMAX E6 radio SPI Flysky AFHDS2A
Spare parts specifications: Motor Mode: EX1103 KV11000 Configu-ration: 9N12P Stator Diamter: 11mm Stator Length:3mm Shaft Diameter: Φ1.5mm Motor Dimension (Dia.*Len):Φ13.5mm*15.5mm Weight(g): 3.8g No.of Cells(Lipo): 1-2S
Propellers Weight: 0.88g Material: PC Pitch: 2.3inch Props Dia: 52.17mm Center Thickness: 5mm Center Hole Dia: 1.5mm
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Firmware target: Z_H_30 Default protocol: DSHOT300 Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module
Onboard SPI Frsky D8/D16 receiver Version SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU transmitter D8/D16 modelChannels: 8ch/16ch No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Onboard SPI Flysky receiver Version SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200meter Failsafe support
Onboard 5.8g OPENVTX Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw)
Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.)
