iFlight SucceX F4 TwinG FC + SucceX 50A 2-6s BLHeli_32 Flytower

by iFlight
$79.99
iFlight SucceX F4 TwinG FC + SucceX 50A 2-6s BLHeli_32 Flytower

FC Specifications:
MCU:STM32F405R6T6
I-MU:Twins IC2689,Twins Gyros built-in(SPI)
Baro:NO
OSD:AT7456E
Blackbox:Blackbox logging device
5X Uarts(1 2 3 4 5)with build-in inversion
8X Dshot/Proshot/Oneshot output
8X individual ESC power/ signal pads
1X Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
Smart audio & Tramp VTX protocol:YES(IRC Tramp)
WS2812 led Strip:YES
Beeper:YES
PDB Specifications
Input:2-6S(5-36V)
BEC:5V/3A cont

FC Firmware
Betaflight/INAV
Target:STM32F405-
FC:IFRC/IFF4_TWIN_G(STM32F405)

Physical
Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
Dimensions:36*36mm
Weight:6.3g

SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC

Features:
8 layers double-sided PCB board;
4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
32bit FO51K86 MCU, 48mHz maximum clock speed;
TDK MLCC Low ESR ceramic capacitors;
Top grade NTMFS5C430NL MOSFET;
Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

Specification:
Dimension: 43*39mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight:14.4g
Supports 2-6S lipo input
STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
Current sensor: Yes
BEC: No
Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
Target: iFlight-BL32-4IN1

RECOMMENDATION:
No additional capacitor needed up to 5S!
To encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!

Package included:
SucceX F4 TwinG FC+ SucceX 50A 2-6s BLHeli_32 Flytower (pre-assembled)

You recently viewed

Clear recently viewed

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
Become a member and save $3 storewide! Register or Login.