JJRC RC Car C8813 4WD Rock Crawler 2.4G Off-Road RC Truck Climbing Vehicles

Meet the JJRC RC Car C8813, your next adventure buddy that combines rugged looks and powerful performance. Designed to resemble a real pickup truck, it doesn't just look tough – it delivers where it counts. With its high-torque brushed motor and 20A waterproof ESC, you’ll experience strong, smooth power, whether speeding through open trails or climbing tough obstacles.

Thanks to its smart horizontal steering system, the car's lightweight body and low center of gravity give it a real edge when tackling rough terrain. The high ground clearance and oversized, wider tires keep it steady and responsive, whether navigating tight turns or powering over rocks.

If you’re after an RC car that can handle a bit of everything and look great while doing it, the JJRC RC Car C8813 is the one for you.

Package included:

1x RC Car 

1x Battery

1x Transmitter

1x Charging Cable

1x User Manual

Description:

WPL CB05 LC80 Drive Offroad Climbing Car Car Shell Assembly for RC Truck

Description:
Competitive version and standard are optional. The former adds a competitive front bumper, a competitive bumper headlight cup, a classic square lamp in the grid, a left and right bumper, a roof rack, a spotlight seat, and a rear climbing ladder. See figure for details

Non-destructive installation design, the car shell can be directly installed and used

This product is off-white, which is also suitable for players with strong hands-on ability to paint by themselves (any color can cover off-white)

This car shell is compatible with WPL C14/C24 frame, the wheelbase is the same, both are 190 mm; the length of the car shell is 310 mm, plus the protective frame and spare tire size is about 340 mm

Specification:Specifications:
Color: Milky White
Material: plastic
Optional set: standard version kit; competitive version kit
Applicable Model: for RC Car WPL CB05 LC80 Four-wheel Drive Offroad Climbing Car

Package Include:
1 x Car Shell Assembly for RC Car

LDRC 2801 RC Drift Car RTR 1:28 4WD POLO R Model with LED Lights Full Proportional On-Road Racing

Looking for a fun and affordable RC car that offers an exciting drift experience? The LDRC 2801 RC Drift Car is perfect for beginners or anyone on a budget. It combines performance and affordability in one great package.

Whether you’re new to RC drifting or searching for the ideal gift, this car delivers incredible value. It’s designed for those who want high performance without breaking the bank.

Key Features:

• Budget-Friendly: Ideal for entry-level RC enthusiasts or as a fun gift. This car offers high performance at a low price.
• Realistic Design: A 1:28 scale model that faithfully reproduces the look of a real car. It features a sturdy build with full-proportional controls for smooth, responsive driving.
• Drift-Ready: Equipped with racing and drift tires, plus a durable nylon frame. Enjoy precise drifting action straight out of the box.
• Perfect Gift: Great for holidays or special occasions. The LDRC 2801 RC Drift Car is perfect for kids or friends who love RC cars and drifting.

Performance Specs:

• Max Speed: Up to 10km/h. Perfect for indoor or outdoor racing.
• Battery Life: 20-30 minutes of playtime on a full charge. It includes built-in protection to ensure safe, reliable performance.
• 2.4G Remote Control: Offers full proportional throttle and steering control. The remote has a range of up to 20 meters.

Power System:

• ESC: 10A ESC speed controller
• Motor: 130 brushed high-speed motor
• Servo: 4.3g steering servo

With its blend of affordability, ease of use, and solid performance, the LDRC 2801 is an ideal entry-level drift car. It’s perfect for anyone looking to enjoy the thrill of RC drifting without a large investment. Plus, it makes a fantastic gift for the holidays or special occasions!

Package Included:

1X RC Drift Car

1X Battery

1X Remote Controller

1X USB Charging Cable

Makerfire Armor Blue Bee FPV Drone KIT 65mm Racing Drone RC Quadcopter w/Altitude Hold Function

Introducing the Makerfire FPV drone kit 65mm RC Racing Quadcopter, specially crafted for FPV beginners eager to dive into the world of racing. With its compact size and beginner-friendly features, this quadcopter is the perfect platform for mastering FPV flight.

Buy Blue Bee Drone get 50% off the 300mah Batteries

The Makerfire FPV Drone Kit is designed to provide a seamless introduction to FPV racing. It comes pre-assembled, allowing beginners to focus on the thrill of flying without the complexities of assembly. The lightweight frame and powerful motors offer responsive control and impressive maneuverability, making it easy to navigate through challenging race tracks.

Equipped with an AIO FPV camera and a makerfire 3inch fpv monitor, this quadcopter allows you to experience real-time, first-person views from the drone's perspective. Immerse yourself in the excitement of FPV racing as you zip through obstacles and compete against fellow pilots.

The Makerfire FPV drone kit is designed with beginner-friendly flight controls and adjustable flight speed modes. These features enable newcomers to gradually enhance their skills at their own pace. The stability and responsiveness of the quadcopter help build confidence, making it an ideal choice for those starting their FPV journey.

Start your FPV adventure with this FPV drone kit and unleash your racing potential!

Specifications:

Item name: Makerfire Armor Blue Bee FPV Drone Kit

Channels: 4 Channels

Gyroscope: 6-Axis

Wheelbase: 65mm

Camera: Makerfire AIO Camera with VTX

VTX Power: 25mw 40CH

Motor: 716 Coreless motor

Function: Forward/backward, up/down, left/right, sideward flight, 3D-flip, headless mode, high/low/medium speed, 

Flight distance: Around 100m

Battery for quadcopter: 3.7V 1S 300mAh li-po

Charging time: About 30-50 minutes

Working time: About 4-5 minutes

Battery for remote controller: 2 x AA battery (not included)

Item dimension: 80 * 80 * 45mm

Makerfire 3 Inch LCD 480x320 Auto Search FPV Monitor:

Built-in 3.7V 800mAh Battery

Support a key search frequency

RaceBand 40 channel Auto-Searching

Real-time video return 5.8G FPV Receiver

Feature:

Small size and light weight;

Low power consumption, Working current 360~400mA;

RaceBand 40 channel, Auto-Searching;

3.0 Inch 480*320 dot high brightness LCD screen;

Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;

Built-in 3.7V/800mAh high-capacity Li-ion polymer Battery;

Universal USB charging interface;

Real-time video return, Very low time-delay;

Bilingual menu in support of Chinese and English;

Support external video signal input;

Support AV signal output (Connect external DVR);

Specification:

Makerfire Mini FPV Monitor

Screen : 3.0 Inch IPS LCD

Resolution: 480*320

Display Ratio: 16:9

View Angle: 360 ° without dead angle

Brightness: 500cd/m² with high brightness backlight LED

Video delay

Video time-delay less than 20ms

Interface

Antenna: RP-SMA male

USB: To charge the battery

AV Jack: External video signals input or internals AV signal output

Languages:

English and Chinese

Power Supply

Power adapter: DC5V/1A (USB interface)

Battery: 3.7V/800mAh,Each full charge revive around 2hr working time

Power Consumption:

The device operating current of 360~400mA at 3.7~4.2V;

Built-in battery maximum charge current of 800mA.

Makerfire Mini FPV Monitor User Manual

Package Included:

1* Makerfire FPV Starter RC Racing Drone (including 2pcs 3.7V 1S 300mAh li-po battery)

1* Makerfire 3-inch LCD Monitor

1* RP-SMA Antenna

2* 3.5mm AV cable

1* Charging cable

4* Blades

1* Remote controller

2* User Manual

In stock now, Welcome to place order!(2024/4/24)

Mobula6 2024 1S 65mm Ultra Light Micro FPV Whoop BNF 2.4GHz ExpressLRS Receiver 5.8G Openvtx

Features:
AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
Super light 1S 65mm Brushless whoop only 17.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
FX17-B 1/3 CMOS 800TVL Camera awesome footage
Smooth and powerful
Compatible for 1S Lipo/LIHV

Specifications:
Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g

Motor：
Mode: SE0702 KV28000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only

Propellers：
Materials: PC
Inch: 31mm
Pitch: 0.8 in
Weight: 0.21g
Mount hole diameter: 1mm

Flight controller：
SuperX ELRS AIO 5-IN-1 Flight controller
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
Sensor:BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
Built-in UART ExpressLRS v3.0.0
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 1175

Onboard 4in1 ESC：
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay v0.19.2
Default protocol: DSHOT300
Recommend ESC Startup power value to min1100/max1200

Onboard Serial ExpressLRS receiver：
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire antenna
Telemetry output Power: <12dBm
Receiver protocol: Serial_based CRSF
Compatible with ExpressLRS V3.x.x TX Module
Could flash single ELRS receiver firmware by Wifi
ExpressLRS firmware target: Generic ESP32 2.4Ghz RX and VTX

Onboard 5.8g VTX:
Firmware version: OPENVTX
MSP VTX
PIT Mode support
Channels:40ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL

FX17-B Camera:
Model:FX17-B
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
FOV 150°
Signal System: NTSC
Net Weight: 1.5g
Dimensions: L14mm*W14mm*H13mm

Package Included:
1x Mobula6 2024 1S 65mm whoop Drone Frame +Canopy
1x SuperX ELRS AIO 5-IN-1 Flight controller
4x SE0702 KV28000 brushless motor
1x Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
1x FX17-B 1/3 CMOS 800TVL camera NTSC 4:3
1x Onboard 5.8G 25mw~400mw VTX
1x Spare canopy
1x Propeller disassemble tool
1x Screw driver

MJX HYPER GO 14301 14302 1/14 2.4G 42km/h Sport Drift RC Car Brushless High Speed Vehicle Models

Maximum speed using 2S battery: 42km/h (Standard version)
Maximum speed with 3S battery: 55km/h (Upgrade version)

MJX 2S 7.4V 25c 3000mAh L I-PO Battery

New Upgraded 3S Battery 11.1V 25C 2000mAh L I-PO Battery

Specification:
Basic information
Brand: MJX
Models: HYPER GO 14301 14302
Model: 1/14
Speed: 42km/h

Power system
ESC: 45A
Servo: 17g digital servo 2.4kg
Motor: brushless 2845 3700KV w/ almilnum hot sink fan

Transmitter
Frequency: 2.4 GHZ
Battery: 2XAA battery(not included)

Battery:
7.4V 2000mAh 15C

Dimension
Size: 320*153*115 mm
Axle base: 192mm
Wheelbase: 125 mm
Tire diameter: 58mm
Package size: 35*20.3*16.6cm
Weight: 2200g

Others
Charge time: 240min
Using time: 13 min
Control distance: 120m
Function: forward,backward,left,right
Proportional control: proportional control

Package Included:
1x car
1x Rechargeable 7.4V 2000mAh 15C battery(built-in)
1x instruction manual
1x USB charging cable
1x hex wrench
1x screwdriver
4x TPR tires
4x slick tires

MJX Hyper Go 14303 1/14 2.4G Brushless RC Car 42km/h 4WD High-speed All-road Car

Maximum speed using 2S battery: 42km/h (Standard version)
Maximum speed with 3S battery: 55km/h (Upgrade version)

MJX 2S 7.4V 25c 3000mAh L I-PO Battery (not included)

New Upgraded 3S Battery 11.1V 25C 2000mAh L I-PO Battery  (not included)

Description:

Unleash the thrill of racing with the MJX Hyper Go 14303, a masterclass in speed and precision engineering. This 1/14 scale brushless RC car is not just fast, it's a lightning bolt on wheels, hitting speeds of up to 42km/h. Designed for those who crave high-speed adventures, this car is a perfect blend of power and performance.

Key Features:

• High-Speed Performance: Zoom past the competition with a top speed of 42km/h, powered by a high-torque brushless 2845 3700KV motor with an aluminum heat sink fan.
• Advanced Power System: Equipped with a robust 45A ESC and a responsive 17g digital servo, delivering precise control for exhilarating racing experiences.
• Long-Range Control: Experience the freedom of racing with a 2.4GHz transmitter offering a control distance of up to 120 meters. Requires 2xAA batteries (not included).
• Extended Play Time: Enjoy up to 13 minutes of uninterrupted racing with a powerful 7.4V 2000mAh 15C battery, rechargeable in just 240 minutes.
• Proportional Steering Control: Navigate with precision, thanks to the proportional control system, ensuring smooth handling in every turn.

Dimensions and Build:

• Compact and Robust: Measuring 320153115 mm with an axle base of 192mm and a wheelbase of 125 mm.
• All-Terrain Tires: Durable 58mm tire diameter, perfect for various racing conditions.
• Lightweight Design: Weighing in at 2105g, this RC car combines strength and agility for optimal performance.

Why Choose the MJX Hyper Go 14303?
Perfect for both beginners and seasoned racers, the MJX Hyper Go 14303 offers an unmatched blend of speed, control, and durability. Whether it's off-road adventures or competitive racing, this RC car is built to impress. Embrace the speed, command every turn, and dominate the track with the MJX Hyper Go 14303!

Package Included:
1x car
1x Rechargeable 7.4V 2000mAh 15C battery(built-in)
1x instruction manual
1x USB charging cable
1x hex wrench
1x screwdriver
4x TPR tires
4x slick tires

Note: The MJX H12Y/H12Y+ is in limited stock! Order Now!

Features

• Durable aluminum alloy car shell for enhanced protection and longevity.
• High-torque 20KG metal gear servo with a robust metal casing (standard servo).
• Metal shock absorbers with adjustable spring travel and oil pressure dampening for improved stability on rough terrain.
• Complete ball bearing setup across the vehicle for smoother and more efficient movement.
• Metal gear axles and durable nylon gears in the gearbox, ensuring reliable power transmission.
• Heavy-duty full metal drive shafts for enhanced durability.
• Front and rear portal axles for increased ground clearance.
• Front and rear LED light set for visibility and a realistic look.
• Dual sets of tires and suspension springs for customizable driving options.
• Adjustable aluminum ring shocks with spring travel control for a personalized driving experience.

Click Here to Buy Upgraded MJX Hyper Go H12Y+（Yellow Shell & BLDC Motor with Sensor）