31-60

Happymodel SE0802 1-2S Brushless Motor Benchmark Model No-load Test Propellers Voltage (V) Current (A) Thrust (g) Power (W) Efficiency (g/W) SE0802 KV16000 0.27A 31150RPM 1.9V 16394.7KV 31mm 4-blades 4.20 0.96 8.20 4.032 2.034 4.20 2.05 14.00 8.610 1.626 4.20 3.18 17.40 13.356 1.303 4.20...

Happymodel 2.4g ExpressLRS ELRS TX module ES24TX-Lite for T-lite Introduction：Specific Lite 2.4GHz ExpressLRS TX module for Jumper T-lite is coming out now.This Lite TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and...

Happymodel BeecoreX FR Brushed F4+ESC +VTX+RX+OSD Flight Controller For Inductrix Tiny Whoop E010 E010S - Frsky Receiver The BeecoreX is a ultimate flight controller for Brushed Tinywhoop , it include F4 FC, vtx , ESC, frsky receiver and betaflight OSD. It makes very easy to build a brushed tinywhoop....

Are you ready to upgrade your 65mm/75mm/85mm whoops?YES!! The Happymodel CrazybeeX built-in ESC/VTX/Frsky SPI RX/OSD will handle 1-2S battery!! Note:This product is discontinued. Important: Not compatible with big propeller like 65mm/75mm when use 2s battery . Recommend max size of propeller is 55mm. Flight...

Happymodel CrazyF405HD ELRS 1-2S AIO Flight Controller Built-in UART ELRS Receiver and 12A BLHELI_S ESC Happymodel CrazyF405HD is a flight controller with a built-in Serial ELRS receiver and 4-IN-1 Blheli_S 12A ESC specially developed for Digital HD FPV, which removes the analog OSD chip...

Happymodel CrossF4 ELRS 1-2S Flight Controller with Onboard UART ExpressLRS 2.4GHz Receiver Specification:Flight controllerFirmware target: CRAZYBEEF4DX4.3.2MCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: BMI270(SPI connection)Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot300 readyBuilt-in Betaflight OSD(SPI Control)Built-in UART ExpressLRS 2.4Ghz receiver(Default firmware ExpressLRS v3.0.1)Built-in...

Happymodel DiamondF4 AIO 5-IN-1 Flight controller built-in VTX ESC OSD Receiver with Frsky/Flysky Receiver For Moblite 6/7 Specification:Flight controller(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply:...

Happymodel EX0802 KV19000/KV22000/KV14000 New Brushless Motors for Tinywhoop(Pack of 4)  Happymodel EX's new 0802 whoop special motor, adhering to the consistent style of the Happymodel brushless motor with high quality and high cost performance, using tile-shaped magnets, high-precision CNC housing, high efficiency, good dynamic...

Happymodel EX1002 KV20000 Brushless Motor The Happymodel EX1002 KV20000 brushless motor is an ultra-lightweight high-performance motor designed for 1S FPV whoops. With precision engineering, durable construction, and compatibility with models like Mobula7 1S, Mobula7 HD 1S, Moblite7 HDZERO, and Moblite7 Avatar, this motor ensures...

Happymodel EX1102 Brushless Motor – 2–3S Available in 8500KV / 9000KV / 10000KV / 13500KV options. Ultra-light 1102 brushless motor designed for 66–85mm whoops and ductless frames. Perfect balance of power, efficiency, and durability. Features World’s lightest 1102 brushless motor (≈2.8g) Mobula7 HD original...

Happymodel EX1103 KV11000 Brushless Motor for Bassline Mobula 8 Drone Specification:Mode: EX1103 KV11000Configu-ration:9N12PStator Diamter:11mmStator Length:3mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ13.5mm*15.5mmWeight(g):3.8gNo.of Cells(Lipo):1-2S Package Included:4 X EX1103 KV11000 Brushless Motors

Happymodel EX1105 KV5200 Brushless Motors (Out of stock): This motor will no longer be available Specification:Brand Name: HappymodelModel: EX1105Item Name: 1105 KV5200 3-4S Brushless MotorConfigu-ration: 9N12PStator Diameter: 11mmStator Length: 5mmShaft Diameter: Φ1.5mmMotor Dimension(Dia.*Len): Φ14mm*17mmWeight: 5.7gWire length: 70mm include the connectorPlug interface: JST 1.25mm 3pinFeatures:-...

HappyModel EX1202.5 6400KV 11500KV Brushless Motor for Crux3(Pack of 4) Features:HappyModel's latest EX1202.5 brushless motor, weighs only 4.4 grams, cool design, imported NMB double bearings, high efficiency, durability and smoothness, 2.5 inch or 3 inch advanced Micro brushless motor choice. KV6400 is Crux3 standard motor....

HappyModel EX1404 3500V 3S 1.5mm shaft Motor(Pack of 4) Happymodel EX1404 brushless motor uses imported NMB double bearings, excellent dynamic balance structure, high efficiency, durability and smoothness. The lead-out position increases protection, even if the machine falls, it is not easy to disconnect. It...

Happymodel ExpressLRS module V2 ES900TX/ES900RX Long range ELRS hardware 915mhz support instead ES915TX/ES915RX Notice: The New version ExpressLRS hardware 868MHz/900MHz TX and RX module—ES900TX and ES900RX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the...

Specifications:Brand Name: HappymodelItem Name: Pancake 2-6S AIO flight controllerBetaflight firmware target: CRAZYBEEF4SX1280VTX antenna: U.FLReceiver antenna: Ceramic antennaWeight: 5.2gBuilt-in SPI ELRS 2.4GHz receiverBuilt-in OPENVTX max power up to 400mwCompatible with 20×20 or 35.5×35.5 4-IN-1 ESC Flight controllerFirmware Target: CRAZYBEEF4SX1280MCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU6000 (SPI connection)Mount...

Happymodel SE0702 KV23000 KV26000 KV28000 Brushless Motors for 1S FPV Brushless Whoop The new appearance 0702 brushless motor has been released, and it will be shipped gradually from May 2023.The lightest brushless motors all over the world , the weight is only 1.46gram.You can...

Happymodel Superbee F4 Lite AIO Flight Controller ELRS/Frsky Version for 1S Tiny Whoop Drone Specification:Flight ControllerSuperbeeF4 Lite ELRS/FRSKYSPI ELRS version Firmware target: CrazybeeF4SX1280SPI FRSKY version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)Built-in...

RS1102 Brushless Motor - High Performance for Miniature Drones The RS1102 is a high-performance brushless motor designed for mini drones, offering two KV options of 10000KV and 13500KV for various flying needs. With a lightweight design and a stator diameter of 11mm, it's perfect...