NewBeeDrone AcroBee75 HD BLV4 F7 O3 BNF Racing Drone

NewBeeDrone AcroBee75 HD BLV4 F7 O3 BNF Racing Drone

Introducing the AcroBee75 BLV4 F7 HD O3 BNF - a compact powerhouse. It's the pioneer whoop featuring F7 flight controller and built-in ELRS 2.4 receiver, effortlessly compatible with Dshot600 and bi-directional Dshot. As the tiniest and lightest HD whoop with a complete DJI O3 unit available, it boasts remarkable agility and an impressive flight time of nearly 3.5 minutes. Our expert tuning ensures seamless indoor filming in self-level and acro modes. To optimize performance and visuals, turn on DJI RockSteady via goggle settings. Note that this model is not suitable for outdoor or windy conditions.

Specifications:
Drone Size: 75mm
Flight Controller: BeeBrain BLV4 HD F7 Flight Controller ExpressLRS (ELRS) 2.4G
Frame: Cockroach75 Brushless Frame
Motors: Flow 0804 12000kv Double Ball Bearing Brushless Motor
Propellesr: Azi (Tri-Blade) Micro Propellers 40mm - 1.0mm Shaft
HD VTX & Camera: DJI O3 Air Unit
Canopy: NewBeeDrone Acrobee75 HD O3 Canopy
Total Weight without battery: 70.19g
Total Weight with battery: 98.24g

Recommended battery: Tattu 450mAh 7.4V High Voltage 95C 2S1P Lipo Battery Pack with XT30 Plug

BeeBrain BLV4 HD F7 Flight Controller ELRS 2.4G Specifications:
MCU: STM32F745
ESC Firmware: S-H-40 - Bluejay, 0.19.2, 48kHz.
ESC Specifications: 4 channel 12A ESC
ESC Connector: JST-1.0 3Pin
Weight: 6.6 grams (including antennas and battery connector)
Size: Outer dimensions 29 x 29 x 7.6 mm
Holes: 25.5 x 25.5 mm
Battery input: 2S
Connector: XT30
Internal Blackbox: 16MB
Gyro: BMI270
UART1: SBUS on DJI Connector (RX only)
UART2: TX & RX for internal ExpressLRS 3.0 receiver
UART3: TX & RX for DJI MSP+Displayport
Flight time with Tattu 450mAh 2S battery is 3:00min (at 7v)
Firmware:
BeeBrain BLV4 HD Betaflight 4.4.0 firmware with tune

Pacakge Included:
1x NewBeeDrone AcroBee75 HD DJI O3 BNF
2x Extra HD Canopies
1x Extra Battery Strap (for other sized batteries)

Warning: This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.

*Note: For outdoor flying, RockSteady is required in order to get the best picture quality(On DJI goggle Menu). The PID tune are base on the current setup. If you change any setting on the drone and it is acting weird, please flash the newest firmware