GEELANG DJI Titan 120x HD WHOOP with Caddx Vista

GEELANG DJI Titan 120x HD WHOOP with Caddx Vista

Co-manufacturer：GEELANG
Item Name: Titan 120x whoop
Wheelbase：120mm
Size：144mm *164mm * 46mm
Join the protection circle Size：152mm *172mm * 46mm
Weight： 98g （without battery）
Weight：116g（without battery Join the protection circle）

Motor
Spare parts specifications：
Motor Mode：GL1204 KV4500
Stator specifications：D12 * H2 0.2mm Kawasaki                  
Configu-ration:9N12P                                         
Stator Diamter:12mm                                           
Stator Length:4mm                                             
Shaft Diameter:Φ1.5mm                                          .
Motor Dimension(Dia.*Len):Φ16.0mm*15.8mm
Magent specifications: N52H
Shift specifications: 2mm High strength steel
Bearing Specifications: d2*D5*H2.5 MR52zz Japan ISC Custom made
Winding Specifications: 180℃ Class Multiple oxygen-free copper                                                    Weight(g):5.8g
No.of Cells(Lipo)：3S-4S
 

FC
Flight controller：GEELANG FC GHF411AIO Version:MATEKF411
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)                             
Board size:33 * 33MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 20A(each) BL he li S 4in1 ESC Dshot600 ready
Built-in Beta flight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 480
Built-in 5V 2A BEC
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 20A continuous peak 25A(5 seconds)
Support BL Heli Suite programmable                           
Factory firmware: G_H_30_REV16_7.HEX
Default protocol: DSHOT600
 

LED
RGB LED dual lights, adjustable flight control bf software support

Receiver
Fr sky Mini XM+ EU version SPI receiver                                 
Fr sky  D16 switchable                                            
No ground interference ( Transmitter and receiver 1 m from the ground): 500m
TBS Crossfire version CRSF Protocol , Official TBS transmitter compatible
No ground interference ( Transmitter and receiver 1 m from the ground): 500m
Fr sky（ac900）SPI receiver D16switchable
compatible futaba s-fhss switchable
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
PNP NO RX：No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc
 

• Caddxvista：Dimensions
  • Module: 30.45 x 29 x 13mm
  • Camera: 27.4 x 21.1 x 20.1mm
• Weight: 29g (inc. camera); Module: 19g
• Antenna Connector: u.FL
• Operating Frequency: 5.725-5.85GHz
• Transmitter Power (EIRP)
  • FCC/SRRC/MIC: <20dBm
  • CE: <14dBm
• I/O Interface: USB-C, IPEX, 3-in-1 Port
• Latency: Low Latency Mode (720p 120fps): 21-28ms
  • High-Quality Mode (720p 60fps): 30-40ms
  • Max Transmission Distance: FCC/SRRC: 4km; CE: 0.7km
• Input Power: 7.4-26.4v

• Sensor: 1/3.2" CMOS
• Effective Pixel: 4M
• Lens: 2.1mm f/2.1
• Shutter: Rolling Shutter
• ISO: 100-25600
• FOV: 150(D);122(H);93(V)
• The ground end must be used DJI FPV Goggles

Battery
Highly recommend the use of 4s 450mah, 4s 650mah, 4s750mah、4s 850mah high voltage lithium batteries (Battery is not included)

Package Included
Option1：GEELANG GHF411AIO with external Fr sky XM+ EU version rx
Option2:  GEELANG GHF411AIO with external TBS Crossfire Nano RX
Option3：GEELANG GHF411AIO with external AC900 Compatible with futaba version rx
Option4：GEELANG GHF411AIO NO RX
4 x 1204 4500KV  Motor
1 x CADDX  VISTA
2 x 2.5 Inch propeller（2cw + 2ccw）63mm diameter（EMAX/HQ）EMAX AVAN out of stock will match HQ T2.5x2.5x3
1 x screwdriver
2 x Battery fixing elastic band                                  
1 x tpu 360 camera mount
4 x Protection ring
1 x Spare helmet