Crazybee F4 Pro V2.0 1-2S Flight Controller – Compatible with Mobula7, Frsky/Flysky/DSM2/DSMX RX
Crazybee F4 Pro V2.0 1-2S Flight Controller – Compatible with Mobula7 & Frsky/Flysky/DSM2/DSMX RX
The Crazybee F4 Pro V2.0 is a compact, all-in-one 1-2S flight controller for Tiny Whoop and brushless drones. It integrates a 4-in-1 5A Blheli_S ESC, Betaflight OSD, and supports multiple receiver protocols including Frsky, Flysky, and DSM2/DSMX. Fully compatible with Mobula7 and other brushless whoop drones.
Key Features:
- MCU: STM32F411CEU6 (100MHz, 512K FLASH)
- Gyro Sensor: MPU-6000 (SPI connection)
- Board Size: 28.5 × 28.5mm, Weight: 4.3g
- Power Supply: 1-2S LiPo (DC 3.5-8.7V)
- Built-in 5A each Blheli_S 4-in-1 ESC (Dshot600 ready)
- ESC MCU upgraded to EFM8BB21, supports BLHeliSuite programmable
- Frsky version: Built-in SPI receiver with telemetry (D8/D16 switchable)
- Flysky version: Built-in SPI receiver with telemetry (AFHDS/AFHDS-2A compatible)
- DSM2/DSMX version: Serial-based satellite receiver (default RX2)
- No RX version supports external serial-bus receivers (XM+, Crossfire, S-FHSS, DSM2/DSMX, Ibus)
- Built-in Betaflight OSD (SPI control)
- Built-in current sensor up to 28A (scale 1175) and voltage detection
- 5V 1A Buck/Boost with LC filter
- Multi-serial port support
Onboard 4-in-1 ESC:
- Power Supply: 1-2S LiPo/LiPo HV (3.5-8.7V)
- Current: 5A continuous, peak 6A (3s)
- Factory firmware: S_H_50_REV16_7.Hex
- Default Protocol: DSHOT600
Firmware Target:
- Frsky version: betaflight_4.0.0_CRAZYBEEF4FR.hex
- Flysky version: betaflight_4.0.0_CRAZYBEEF4FS.hex
- DSM2/DSMX version: betaflight_4.0.0_CRAZYBEEF4DX.hex
- No RX version: betaflight_4.0.0_CRAZYBEEF4DX.hex
Package Included:
- 1 × Crazybee F4 Pro flight controller
- 3 × Power cables
- 1 set × Shock absorbing rubber and screws
Crazybee F4 Pro V2.0 1-2S Flight Controller – Compatible with Mobula7, Frsky/Flysky/DSM2/DSMX RX
Description
Crazybee F4 Pro V2.0 1-2S Flight Controller – Compatible with Mobula7 & Frsky/Flysky/DSM2/DSMX RX
The Crazybee F4 Pro V2.0 is a compact, all-in-one 1-2S flight controller for Tiny Whoop and brushless drones. It integrates a 4-in-1 5A Blheli_S ESC, Betaflight OSD, and supports multiple receiver protocols including Frsky, Flysky, and DSM2/DSMX. Fully compatible with Mobula7 and other brushless whoop drones.
Key Features:
- MCU: STM32F411CEU6 (100MHz, 512K FLASH)
- Gyro Sensor: MPU-6000 (SPI connection)
- Board Size: 28.5 × 28.5mm, Weight: 4.3g
- Power Supply: 1-2S LiPo (DC 3.5-8.7V)
- Built-in 5A each Blheli_S 4-in-1 ESC (Dshot600 ready)
- ESC MCU upgraded to EFM8BB21, supports BLHeliSuite programmable
- Frsky version: Built-in SPI receiver with telemetry (D8/D16 switchable)
- Flysky version: Built-in SPI receiver with telemetry (AFHDS/AFHDS-2A compatible)
- DSM2/DSMX version: Serial-based satellite receiver (default RX2)
- No RX version supports external serial-bus receivers (XM+, Crossfire, S-FHSS, DSM2/DSMX, Ibus)
- Built-in Betaflight OSD (SPI control)
- Built-in current sensor up to 28A (scale 1175) and voltage detection
- 5V 1A Buck/Boost with LC filter
- Multi-serial port support
Onboard 4-in-1 ESC:
- Power Supply: 1-2S LiPo/LiPo HV (3.5-8.7V)
- Current: 5A continuous, peak 6A (3s)
- Factory firmware: S_H_50_REV16_7.Hex
- Default Protocol: DSHOT600
Firmware Target:
- Frsky version: betaflight_4.0.0_CRAZYBEEF4FR.hex
- Flysky version: betaflight_4.0.0_CRAZYBEEF4FS.hex
- DSM2/DSMX version: betaflight_4.0.0_CRAZYBEEF4DX.hex
- No RX version: betaflight_4.0.0_CRAZYBEEF4DX.hex
Package Included:
- 1 × Crazybee F4 Pro flight controller
- 3 × Power cables
- 1 set × Shock absorbing rubber and screws