Happymodel Mobula8 2S 85mm Digital HD Micro FPV whoop Drone
Happymodel New Mobula8 Digital HD Micro FPV whoop comes with a new flight controller which is specific for Digital HD CINEWHOOP. Built in UART ExpressLRS receiver and 12A 4-IN-1 BLheli_S ESC. The same Brushless motor and Gemfan 2023 propeller like the Mobula8 Analog version. Comes With DJI O3, Walksnail avatar and HDZERO VTX option. Smooth flight and High definition video transmission would bring us exited FPV experience.
Features: Digital HD FPV experience
New CrazyF405 ELRS HD flight controller Powerful and Smooth UART ExpressLRS receiver Built-in blackbox for Gyroflow and PID Tune
Spare parts specifications: Motor: Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S
Propellers Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm
Flight controller MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) GYRO Sensor: BMI270 (SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Serial ExpressLRS 2.4G Built-in BMP280 Barometer Built-in 8MBp blackbox Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeli_S Bluejay firmware Factory firmware: Bluejay ESC V0.19 Firmware target: Z-H-30 Default protocol: DSHOT300 When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200
DJI O3 Air Unit Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2 D-Cinelike mode for Vivid Colors Flagship O3+ Video Streaming Customizable Canvas Mode 155° Super-Wide FOV 1/1.7-Inch Sensor Compact in Size
Walksnail version Camera Model: Avatar lite camera Image Sensor: 1/2.7”1nch Resolution: 1080P/60fps,720P/120fps,720P/60fps Ratio: 16/9 4/3 Lens: 2.1mm FOV: 170° Aperture: F2.0 Shutter Rolling: Rolling shutter Min.Illumination: 0.001Lux Weight: 1.8g Dimensions: 14*14*16mm VTX Model: Avatar mini 1s module Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface: JST1.0*6(Power in)JST0.8*4(USB) Mounting Holes: 25.5*25.5mm Dimensions: 30*30*6.5mm Storage: 8G Recording: 1080p/720p Weight: 5.1g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input : 3.1V-5V Supported FC System Betaflight OSD: Canvas mode Bitrate: 25mbps 50mbps Latency:Average delay 22ms Antenna: IPEX
HDZERO Version HDZero Nano Lite Camera 14x16x11 mm 1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130° H:108° v:84° 16:9:D:122° H:108° V:65° HDZero Whoop Lite VTX 1-3S Input 25mW/200mW RF Output-SmartAudio Support 25.5x25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5x32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding)
Package Included: 1X Mobula8 Frame 1X CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4 4X EX1103 KV11000 brushless motor 1X Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) Option1: DJI O3 Air unit Option2: Walksnail avatar HD Mini 1S lite kit Option3: HDZERO Whoop Lite bundle Option4: No VTX and camera version 1X Canopy 1X Screw driver
Took about a month to get here. Works perfectly! Arrived in perfect condition. So much fun. Love it! I have the Mob 8 Walksnail. No complaints. Using the GNB 720Mah Red batteries. They don't quite fit, had to cut the bottom plastic bars. Added and run velcro straps under battery support and around all the sides of the battery and it doesn't move. I get 8-10 minutes with these batteries just flying around. Added Youtube video of me flying the Mobula 8 Walksnail. This is my first real life any kind of flight.
B
Brent Albertson
Mobula 8 Whoopy fun
Great little machine, good service and well worth the wait. (only three weeks from order to delivery in New Zealand).
