JJRC RC Car C8813 4WD Rock Crawler 2.4G Off-Road RC Truck Climbing Vehicles

Meet the JJRC RC Car C8813, your next adventure buddy that combines rugged looks and powerful performance. Designed to resemble a real pickup truck, it doesn't just look tough – it delivers where it counts. With its high-torque brushed motor and 20A waterproof ESC, you’ll experience strong, smooth power, whether speeding through open trails or climbing tough obstacles.

Thanks to its smart horizontal steering system, the car's lightweight body and low center of gravity give it a real edge when tackling rough terrain. The high ground clearance and oversized, wider tires keep it steady and responsive, whether navigating tight turns or powering over rocks.

If you’re after an RC car that can handle a bit of everything and look great while doing it, the JJRC RC Car C8813 is the one for you.

Package included:

1x RC Car 

1x Battery

1x Transmitter

1x Charging Cable

1x User Manual

Description:

WPL CB05 LC80 ドライブ オフロード クライミング カー カー シェル アセンブリ RC トラック用

説明：
競合バージョンと標準はオプションです。前者は、競争力のあるフロント バンパー、競争力のあるバンパー ヘッドライト カップ、グリッド内のクラシックなスクエア ランプ、左右のバンパー、ルーフ ラック、スポットライト シート、およびリア クライミング ラダーを追加します。詳細は図を参照

非破壊的な取り付け設計で、車のシェルを直接取り付けて使用できます

この製品はオフホワイトで、自分でペイントする実践能力の高いプレーヤーにも適しています (オフホワイトはどの色でもカバーできます)。

この車のシェルは WPL C14/C24 フレームと互換性があり、ホイールベースは同じで、どちらも 190 mm です。車のシェルの長さは 310 mm、保護フレームとスペア タイヤのサイズは約 340 mm です。

仕様:仕様:
色: 乳白色
素材: プラスチック
オプション セット: 標準バージョン キット;競争力のあるバージョン キット
対応機種：RCカーWPL CB05 LC80四輪駆動オフロードクライミングカー用

パッケージ内容:
RCカー用1×カーシェルアセンブリ

LDRC 2801 RC Drift Car RTR 1:28 4WD POLO R Model with LED Lights Full Proportional On-Road Racing

Looking for a fun and affordable RC car that offers an exciting drift experience? The LDRC 2801 RC Drift Car is perfect for beginners or anyone on a budget. It combines performance and affordability in one great package.

Whether you’re new to RC drifting or searching for the ideal gift, this car delivers incredible value. It’s designed for those who want high performance without breaking the bank.

Key Features:

• Budget-Friendly: Ideal for entry-level RC enthusiasts or as a fun gift. This car offers high performance at a low price.
• Realistic Design: A 1:28 scale model that faithfully reproduces the look of a real car. It features a sturdy build with full-proportional controls for smooth, responsive driving.
• Drift-Ready: Equipped with racing and drift tires, plus a durable nylon frame. Enjoy precise drifting action straight out of the box.
• Perfect Gift: Great for holidays or special occasions. The LDRC 2801 RC Drift Car is perfect for kids or friends who love RC cars and drifting.

Performance Specs:

• Max Speed: Up to 10km/h. Perfect for indoor or outdoor racing.
• Battery Life: 20-30 minutes of playtime on a full charge. It includes built-in protection to ensure safe, reliable performance.
• 2.4G Remote Control: Offers full proportional throttle and steering control. The remote has a range of up to 20 meters.

Power System:

• ESC: 10A ESC speed controller
• Motor: 130 brushed high-speed motor
• Servo: 4.3g steering servo

With its blend of affordability, ease of use, and solid performance, the LDRC 2801 is an ideal entry-level drift car. It’s perfect for anyone looking to enjoy the thrill of RC drifting without a large investment. Plus, it makes a fantastic gift for the holidays or special occasions!

Package Included:

1X RC Drift Car

1X Battery

1X Remote Controller

1X USB Charging Cable

Makerfire マイクロ FPV RC レーシング クアドコプター おもちゃ 5.8G S2 800TVL 40CH カメラ / 3 インチ LCD スクリーン 自動検索モニター レーシング ドローン

特徴：

• マイクロ: 180mm の軽量 RC レーシング ドローンは、屋内での飛行を可能にします。
• 高性能：高度な飛行制御システムにより、シミュレートされた飛行が可能になります。
• 5.8G より強力な信号: デュアル アンテナと自動検索により、受信信号と飛行距離がより強く、より安定します。

仕様:
商品名：Makerfire FPVスターターキット
チャンネル: 4 チャンネル
ジャイロスコープ: 6 軸
カメラ: 800TVL
ホイールベース：65mm
モーター: 716 モーター
機能: 前方/後方、上/下、左/右、横向き飛行、3D フリップ、ワンキー リターン、ヘッドレス モード、高速/低速、
のんきモード 操作距離：30m
クアッドコプター用バッテリー: 3.7V 300mAh リポ
充電時間：約30～50分
作業時間：約4～5分
リモコン用電池：単3電池2本（別売り）
商品の寸法: 80 * 80 * 45mm
商品重量：20g

特徴：
小型軽量。
低消費電力、動作電流 360~400mA;
RaceBand 40 チャンネル、自動検索;
3.0 インチ 480*320 ドットの高輝度 LCD 画面。
特にRaceBandを備えた超高感度5.8GHz 40chレシーバーを内蔵。
内蔵の 3.7V/800mAh 大容量リチウムイオンポリマーバッテリー;
ユニバーサル USB 充電インターフェース;
リアルタイムのビデオ リターン、非常に短い時間遅延。
中国語と英語をサポートするバイリンガル メニュー。
外部ビデオ信号入力をサポートします。
AV信号出力をサポート（外部DVRを接続）;
「DJI」などのビデオグラスの受信機として使用できます。興味画面機能付き。

パッケージは以下を含みます：
1 * Makerfire FPV スターター RC レーシング ドローン
1 * 3 インチ液晶モニター
1 *リモコン
1 * ユーザーマニュアル

In stock now, Welcome to place order!(2024/4/24)

Mobula6 2024 1S 65mm Ultra Light Micro FPV Whoop BNF 2.4GHz ExpressLRS Receiver 5.8G Openvtx

Features:
AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx
Super light 1S 65mm Brushless whoop only 17.7g
Equipment with the lightest brushless motors-SE0702 only 1.46gram
FX17-B 1/3 CMOS 800TVL Camera awesome footage
Smooth and powerful
Compatible for 1S Lipo/LIHV

Specifications:
Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g

Motor：
Mode: SE0702 KV28000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.46g
No.of Cells(Lipo):1S only

Propellers：
Materials: PC
Inch: 31mm
Pitch: 0.8 in
Weight: 0.21g
Mount hole diameter: 1mm

Flight controller：
SuperX ELRS AIO 5-IN-1 Flight controller
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
Sensor:BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
Built-in UART ExpressLRS v3.0.0
Built-in voltage meter sensor, voltage meter scale 110
Built-in current meter sensor, current meter scale 1175

Onboard 4in1 ESC：
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Bluejay v0.19.2
Default protocol: DSHOT300
Recommend ESC Startup power value to min1100/max1200

Onboard Serial ExpressLRS receiver：
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire antenna
Telemetry output Power: <12dBm
Receiver protocol: Serial_based CRSF
Compatible with ExpressLRS V3.x.x TX Module
Could flash single ELRS receiver firmware by Wifi
ExpressLRS firmware target: Generic ESP32 2.4Ghz RX and VTX

Onboard 5.8g VTX:
Firmware version: OPENVTX
MSP VTX
PIT Mode support
Channels:40ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL

FX17-B Camera:
Model:FX17-B
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
FOV 150°
Signal System: NTSC
Net Weight: 1.5g
Dimensions: L14mm*W14mm*H13mm

Package Included:
1x Mobula6 2024 1S 65mm whoop Drone Frame +Canopy
1x SuperX ELRS AIO 5-IN-1 Flight controller
4x SE0702 KV28000 brushless motor
1x Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw)
1x FX17-B 1/3 CMOS 800TVL camera NTSC 4:3
1x Onboard 5.8G 25mw~400mw VTX
1x Spare canopy
1x Propeller disassemble tool
1x Screw driver

MJX HYPER GO 14301 14302 1/14 2.4G 42km/h Sport Drift RC Car Brushless High Speed Vehicle Models

Maximum speed using 2S battery: 42km/h (Standard version)
Maximum speed with 3S battery: 55km/h (Upgrade version)

MJX 2S 7.4V 25c 3000mAh L I-PO Battery

New Upgraded 3S Battery 11.1V 25C 2000mAh L I-PO Battery

Specification:
Basic information
Brand: MJX
Models: HYPER GO 14301 14302
Model: 1/14
Speed: 42km/h

Power system
ESC: 45A
Servo: 17g digital servo 2.4kg
Motor: brushless 2845 3700KV w/ almilnum hot sink fan

Transmitter
Frequency: 2.4 GHZ
Battery: 2XAA battery(not included)

Battery:
7.4V 2000mAh 15C

Dimension
Size: 320*153*115 mm
Axle base: 192mm
Wheelbase: 125 mm
Tire diameter: 58mm
Package size: 35*20.3*16.6cm
Weight: 2200g

Others
Charge time: 240min
Using time: 13 min
Control distance: 120m
Function: forward,backward,left,right
Proportional control: proportional control

Package Included:
1x car
1x Rechargeable 7.4V 2000mAh 15C battery(built-in)
1x instruction manual
1x USB charging cable
1x hex wrench
1x screwdriver
4x TPR tires
4x slick tires

MJX Hyper Go 14303 1/14 2.4G Brushless RC Car 42km/h 4WD High-speed All-road Car

Maximum speed using 2S battery: 42km/h (Standard version)
Maximum speed with 3S battery: 55km/h (Upgrade version)

MJX 2S 7.4V 25c 3000mAh L I-PO Battery (not included)

New Upgraded 3S Battery 11.1V 25C 2000mAh L I-PO Battery  (not included)

Description:

Unleash the thrill of racing with the MJX Hyper Go 14303, a masterclass in speed and precision engineering. This 1/14 scale brushless RC car is not just fast, it's a lightning bolt on wheels, hitting speeds of up to 42km/h. Designed for those who crave high-speed adventures, this car is a perfect blend of power and performance.

Key Features:

• High-Speed Performance: Zoom past the competition with a top speed of 42km/h, powered by a high-torque brushless 2845 3700KV motor with an aluminum heat sink fan.
• Advanced Power System: Equipped with a robust 45A ESC and a responsive 17g digital servo, delivering precise control for exhilarating racing experiences.
• Long-Range Control: Experience the freedom of racing with a 2.4GHz transmitter offering a control distance of up to 120 meters. Requires 2xAA batteries (not included).
• Extended Play Time: Enjoy up to 13 minutes of uninterrupted racing with a powerful 7.4V 2000mAh 15C battery, rechargeable in just 240 minutes.
• Proportional Steering Control: Navigate with precision, thanks to the proportional control system, ensuring smooth handling in every turn.

Dimensions and Build:

• Compact and Robust: Measuring 320153115 mm with an axle base of 192mm and a wheelbase of 125 mm.
• All-Terrain Tires: Durable 58mm tire diameter, perfect for various racing conditions.
• Lightweight Design: Weighing in at 2105g, this RC car combines strength and agility for optimal performance.

Why Choose the MJX Hyper Go 14303?
Perfect for both beginners and seasoned racers, the MJX Hyper Go 14303 offers an unmatched blend of speed, control, and durability. Whether it's off-road adventures or competitive racing, this RC car is built to impress. Embrace the speed, command every turn, and dominate the track with the MJX Hyper Go 14303!

Package Included:
1x car
1x Rechargeable 7.4V 2000mAh 15C battery(built-in)
1x instruction manual
1x USB charging cable
1x hex wrench
1x screwdriver
4x TPR tires
4x slick tires

Note: The MJX H12Y/H12Y+ is in limited stock! Order Now!

Features

• Durable aluminum alloy car shell for enhanced protection and longevity.
• High-torque 20KG metal gear servo with a robust metal casing (standard servo).
• Metal shock absorbers with adjustable spring travel and oil pressure dampening for improved stability on rough terrain.
• Complete ball bearing setup across the vehicle for smoother and more efficient movement.
• Metal gear axles and durable nylon gears in the gearbox, ensuring reliable power transmission.
• Heavy-duty full metal drive shafts for enhanced durability.
• Front and rear portal axles for increased ground clearance.
• Front and rear LED light set for visibility and a realistic look.
• Dual sets of tires and suspension springs for customizable driving options.
• Adjustable aluminum ring shocks with spring travel control for a personalized driving experience.

Click Here to Buy Upgraded MJX Hyper Go H12Y+（Yellow Shell & BLDC Motor with Sensor）