Radiolink AT10II 2.4Ghz 12CH RC Transmitter and Receiver R12DS AT10 II PRM-01 Voltage Return for RC Drone Fixed Wing Quadcopter(Mode 2 Left Throttle)
- Excellent Anti-interference: Only 3ms for 12 channels synchronously, strong anti-jump DSSS & FHSS work synchronously to keep the excellent anti-interference performance.
- Real-time Information : Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen. Support extended motor voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when working with flight controller APM or PIX.
- Multiple Alarm: Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended motor voltage alarm. DD sounds and words alarming display on the backlight LCD screen to avoid ignorance when you are in noise environment.
- Voltage Protection System : RadioLink AT10II has included a circuit that prevents damage if you plug it in the wrong way. Low consumption of battery, A 3s 1800mAh liPo battery can work more than 12 hours.
- Pack Multiple Models : Support Radiolink's R9DS, R12DSM, R6DS, R6DSM,R12DS, receiver. Works with most racer quads on the market, suitable for FPV racing drone, helicopter, multirotor, car, boat and more.
- Programmable Mix Control : 5-12CH can be adjusted from programmable mix control for fine control over most basic model aircraft functions.
- Variety Switches: Switches are different lengths for easy recognition and use. 3 VR switches, 3 three-way position switches, 4 two-way position switches, 1 reset trainer switch. Support multiple antenna control mode and 2 PTZ * control
AT10II RC Transmitter Specifications:
Control Distance: up to 4000 meters in the air
Frequency: 2.4GHz ISM bands (2400MHz to 2483.5MHz)
Channel Bandswidth: 5.0MHz
Spread Spectrum: DSSS & FHSS
Adjacent Channel Rejection: 38dbm
Transmitter Power: <100mW (20dbm)
Working Current: <90mA
Working voltage: 7.4~15.0V
Section Precision: 4096
Screen: 3.5 inch 16 colorful screen, 320*480 pixels
Support receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM
R12DS Receiver Specifications
Channel: PWM 12 channels, SBUS 12 channels
Working voltage: 4.8-10V
Working Current: 38-45mA (input voltage: 5V)
Prm-01 Voltage Telemetry Module Specifications:
Size: 33 * 22 * 11mm (1.3" * 0.87" * 0.43)
Weight (with wire): 7g (0.25oz)
Input Voltage Range: 1S~6S LiPo Battery
Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
Compatible Transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Package List with Receiver:
AT10II Transmitter Mode 2 x1
Radio Link R12DS Receiver x 1
Radiolink PRM-01 module x1
Mode 1/2 changing parts x 1
Simple manual x 1
Transmitter Lanyard x 1