HAPPYMODEL

2025 Upgraded & New Release! The Happymodel Mobula7 Freestyle BNF is an ultra-light 75mm indoor freestyle drone, designed specifically for HD freestyle flying. Weighing only 24.5 grams, this drone features the new HDZero AIO5 Flight Controller, providing an integrated flying experience. The Mobula7 is...

2pcs Happymodel Bwhoop65 65mm Brushless Tiny Whoop Frame Kit For Micro FPV Racing Drone Description:Bwhoop65 is a high performance Brushless Tiny whoop Frame for Indoor FPV, light weight and durable. Compatible most 0603 brushless motor, like Racerstar0603, Boldclash0603, Happymodel 0603, Betafpv0603 etz.. Specifications:Brand name: HappymodelItem...

Specifications: Item name: SE0802 1-2S brushless motorKV: 19000KV Shaft Diameter: 1.0mmConfiguration: 9N12PStator Diameter: 8mmStator Length: 2mmMotor Dimension(Dia.*Len): Φ10.5mm*14.9mmTerminals: JST1.25mmNo.of Cells(Lipo): 1-2SWire length(include connector): 40mmSuit for: 65mm-85mm fpv micro quadcopter frameWeight: 1.9g/pcPacking List:4 * 0802 Brushless Motor

4pcs Happymodel EX1103 8000KV 1.5mm 2-3s/EX1103 12000KV 1.5mm 1-2S Micro Drone Motor for Brushess Micro Quadcopter Brushless Whoop Drone Frame 105mm-110mm Micro FPV Racing Drone Specifications:Mode: EX1103KV options: 8000KV 12000KVConfigu-ration:9N12PStator Diamter:11mmStator Length:3mmShaft Diameter: Φ1.5mmMotor Dimension(Dia.*Len):Φ13.5mm*16mmWeight(g):3.7gNo. of Cells(Lipo):8000KV support 2-3S12000KV support 1-2S Package includes:2 *...

Happymodel 1-2S Crux3 3 inch Brushless Toothpick Drone with Frsky SPI/Flysky SPI/DSM2/X SPI/RXSR/TBS Receiver Features:41gram 1-2s brushless Toothpick droneNew AIO 4in1 CrazybeeX flight controller CADDX ANT CameraNew 1202.5 brushless motorXT30 connectorRecommend to use 2s 350mah/400mah/450mah/520mah battery（battery not included）Compatible with Insta360 Go Camera You may...

Happymodel 2.4g ExpressLRS ELRS nano series receiver module PP RX/ EP1 RX/ EP2 RX Notes:Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the...

Happymodel 2.4g ExpressLRS ELRS TX module ES24TX-Lite for T-lite Introduction：Specific Lite 2.4GHz ExpressLRS TX module for Jumper T-lite is coming out now.This Lite TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and...

Happymodel 3K Carbon Fiber Glass Frame for Crux3 Specification:Brand Name: HappymodelWheelbase: 115mmWeight: 5.8gThickness: 2.5mm Package Included:1*frame

Happymodel 65mm Frame for Mobula6 2024 / Mobula6 ECO 2024 Features:Mobula6 2024 new frame is a ultra lighter65mm size Brushless Tiny whoop Frame.Compatible most of the 0603/0702/0802 brushless motor. It’s very soft and durable. Specifications:Wheelbase:65mmWeight:2.8gColor option: Transparent black and Transparent whiteRecommend part list:Propellers: 31mm...

Happymodel 75mm V4 Upgrade Whoop Frame for Moblite7 Mobula7(Pack of 2) Features:Does not block the USB PortLower FC Mount positionMore durableUltralightSpecification:Compatible with: Moblite7 and Mobula7Brand Name: HappymodelColor: Transparent WhiteMax propeller: 40mmWheelbase: 75mmWeight: 5.4gram Package Included:2*V4 Frame

Happymodel New 85mm Mobula8 frame durable, low position FC mountedSpecifications:Brand Name: HappymodelWheelbase: 85mmWeight: 11.5gramColor: Transparent blackMax propeller: 51MMSuitable both 3 hole mount 702/703/802/1102 motors and 4 hole 1002/1102/1103 motors Package Included:2* 85mm Mobula8 frame

Introducing the Happymodel Bassline 2s FPV Racer, designed in collaboration with team pilot Nathan Loopz and now available after being conceptualized in 2019. Experience ultimate control and performance with the X12 5-in-1 AIO flight controller featuring built-in 2.4G ELRS V2.0 and OPENVTX. Long-range transmission...

Looking for a high-performance drone that can keep up with your skills and demands? Look no further than the Happymodel Bassline Digital HD 2S Toothpick Drone! Equipped with an HD Digital VTX system and powerful EX1103 KV11000 motors, this drone is built to handle...

Happymodel BeecoreX FR Brushed F4+ESC +VTX+RX+OSD Flight Controller For Inductrix Tiny Whoop E010 E010S - Frsky Receiver The BeecoreX is a ultimate flight controller for Brushed Tinywhoop , it include F4 FC, vtx , ESC, frsky receiver and betaflight OSD. It makes very easy to build a brushed tinywhoop....

Happymodel Camera Canopy for Crux3 & Mobula8 Description:Brand Name: HappymodelItem Name: Camera Canopy for Crux3 & Mobula8Material: ABSColor option: Transparent blackCompatible with CaddxFPV ANT cameraNet Weight: 1.2gPackage Included:1 x Camera Canopy2 x Screws for Caddx FPV ANT

Specification:Item Name: Camera Canopy for Mobula6Material: PPNet Weight: 1gCamera angle could adjustable easilyColor option:White,Black Package Included:1*Camera Canopy

Happymodel Camera mount bracket for Mobula6 2024 Specification：Brand Name: HappymodelItem Name: Camera mount bracket for Mobula6 2024Material: PPColor option: Transparent blackNet Weight: 0.62gCamera angle could adjustable easilyBest for Mobula6 2024 Package Included:1 x Camera mount bracket2 x M1.2×5 screws

Are you ready to upgrade your 65mm/75mm/85mm whoops?YES!! The Happymodel CrazybeeX built-in ESC/VTX/Frsky SPI RX/OSD will handle 1-2S battery!! Note:This product is discontinued. Important: Not compatible with big propeller like 65mm/75mm when use 2s battery . Recommend max size of propeller is 55mm. Flight...

Happymodel CrazyF4 ELRS AIO 5in1 Flight controller built-in 900MHz(915MHz or 868MHz optional) ELRS Receiver Specifications:Flight controllerMCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in Serial-based ExpressLRS...

Happymodel CrazyF405HD ELRS 1-2S AIO Flight Controller Built-in UART ELRS Receiver and 12A BLHELI_S ESC Happymodel CrazyF405HD is a flight controller with a built-in Serial ELRS receiver and 4-IN-1 Blheli_S 12A ESC specially developed for Digital HD FPV, which removes the analog OSD chip...

The CrazyF411 ELRS flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed) which could support 2-4s. Bigger Mosfet could support high to 20A currents would be better for 2-4S toothpick drone or long range FPV drone. And because...

Happymodel CrossF4 ELRS 1-2S Flight Controller with Onboard UART ExpressLRS 2.4GHz Receiver Specification:Flight controllerFirmware target: CRAZYBEEF4DX4.3.2MCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: BMI270(SPI connection)Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot300 readyBuilt-in Betaflight OSD(SPI Control)Built-in UART ExpressLRS 2.4Ghz receiver(Default firmware ExpressLRS v3.0.1)Built-in...

Happymodel Crux3 1S ELRS 3inch toothpick FPV Racer Drone  Note: The Caddx peanut camera is not included, you can buy it HERE   Features:40gram 1s brushless Toothpick droneAIO Flight controller with ELRS Receiver and 5.8G VTX CADDX ANT CameraNew 1202.5 KV11500 brushless motorRecommend to use...

Happymodel Crux35 HD version CRUX35 HD is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog version and 108g for the digital HD version. The Crux35 serials drone use Happymodel EX1404 high-efficiency motor...

Happymodel DiamondF4 AIO 5-IN-1 Flight controller built-in VTX ESC OSD Receiver with Frsky/Flysky Receiver For Moblite 6/7 Specification:Flight controller(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Original whoop size compatiblePower supply:...

Happymodel ELRS F4 2G4 AIO 5in1 Flight controller built-in SPI 2.4GHz ELRS Receiver V3.1 and V3.3 Version Update log:V3.1 version comes with ICM20689 gyro and V3.3 version comes with BMI270 or ICM42688P gyro due to MPU6000 was discontinued Onboard VTX changed to OPENVTX support 0mw~400mwPre-install...

Note: The Happymodel ELRS X1 AIO 4in1 Flight controller is no longer available. Please order the upgraded X12 ELRS V2.0   The ELRS X1 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_s ESC which could support 2-4s. Bigger Mosfet could...

The ELRS X2 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_S ESC which could support 2-4s. Bigger Mosfet could support high to 12A currents would be better for 2-4S toothpick drone or long range FPV drone. And because the 2.4GHz...

The World first true diversity 2.4 GHz ExpressLRS Rx with RF amps Remark:The EP1 Dual Receiver has update new version. Specification:Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RXESP32 PICO D4, dual SX1280(SX1281)Antenna connector: IPEX MHF 1/U.FLRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: >19dbmReceiver protocol: CRSFInput voltage: +5V DC @ “+” padPCB size: 19mm x 14mmWeight: 1gram exclude antenna Firmware:ExpressLRS v3.0.0 rc1 or latest versionTarget: Unified_ESP32_2400_RX, Append configuration -Generic ESP32 2.4Ghz Diversity RX(EP1 Dual target will be available soon)Firmware update via UART or WIFI Package Included:1*EP1 Dual Receiver2*Antenna

This is a nano sized receiver for the ExpressLRS ELRS system.   The EP1 TCXO uses a temperature conpensated crystal oscillator which means accurate MCU clock frequency for improved performance and reliability of your RC link. The EP1, EP2, and EP1Dual modules are based on...

Happymodel ES900 DUAL RX ELRS Diversity Receiver 915MHz 868MHz Long Range Receiver Specification:Type: 915MHz/868MHz true diversity receiverESP32 PICO D4, dual SX1276Antenna connector: IPEX MHF 1/U.FLRF Frequency: 915MHz or 868MHzTelemetry power: 17dbmReceiver protocol: CRSFInput voltage: +5V DC @ “5v” padPCB size: 21.5mm x 16mmWeight: 1.5gram exclude...

Happymodel EX0802 KV19000 Brushless Motors 1mm Shaft for Mobula6 HD (Pack of 4) Specifications:Brand name: HappymodelItem name: EX0802 brushless motorKV: 19000KV Shaft Diameter: 1.0mmConfiguration: 9N12PStator Diameter: 8mmStator Length: 2mmMotor Dimension(Dia.*Len): Φ10.5mm*14.9mmTerminals: JST1.25mmNo.of Cells(Lipo): 1S onlyWire length(include connector): 27mmWeight: 1.6gFeatures:The lightest 0802 brushless motors around...

Happymodel EX0802 KV19000/KV22000/KV14000 New Brushless Motors for Tinywhoop(Pack of 4)  Happymodel EX's new 0802 whoop special motor, adhering to the consistent style of the Happymodel brushless motor with high quality and high cost performance, using tile-shaped magnets, high-precision CNC housing, high efficiency, good dynamic...

Happymodel EX1102 19000KV 1s Brushless Motor (Pack of 4) Happymodel's new EX1102 KV19000 series motor, the lighter 1102 brushless motor weighs only 2.9g, cool design, with imported NMB double bearings, step shaft double snap springs, more durable. Specifications:Mode: EX1102 KV: 19000Configu-ration: 9N12PStator Diamter: 11mmStator...

Happymodel EX1103 KV11000 Brushless Motor for Bassline Mobula 8 Drone Specification:Mode: EX1103 KV11000Configu-ration:9N12PStator Diamter:11mmStator Length:3mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ13.5mm*15.5mmWeight(g):3.8gNo.of Cells(Lipo):1-2S Package Included:4X EX1103 KV11000 Brushless Motors  

Happymodel EX1105 KV5200 Brushless Motors (Pack of 4) Specification:Brand Name: HappymodelModel: EX1105Item Name: 1105 KV5200 3-4S Brushless MotorConfigu-ration: 9N12PStator Diameter: 11mmStator Length: 5mmShaft Diameter: Φ1.5mmMotor Dimension(Dia.*Len): Φ14mm*17mmWeight: 5.7gWire length: 70mm include the connectorPlug interface: JST 1.25mm 3pinFeatures:- New design rotors- High efficiency and smooth-...

HappyModel EX1202.5 6400KV 11500KV Brushless Motor for Crux3(Pack of 4) Features:HappyModel's latest EX1202.5 brushless motor, weighs only 4.4 grams, cool design, imported NMB double bearings, high efficiency, durability and smoothness, 2.5 inch or 3 inch advanced Micro brushless motor choice. KV6400 is Crux3 standard motor....

HappyModel EX1404 3500V 3S 1.5mm shaft Motor(Pack of 4) Happymodel EX1404 brushless motor uses imported NMB double bearings, excellent dynamic balance structure, high efficiency, durability and smoothness. The lead-out position increases protection, even if the machine falls, it is not easy to disconnect. It...

Specifications:Item: Happymodel EPW6 TCXO 2.4GHz pwm receiverESP8285, SX1280/1281Antenna connector: IPEX MHF 1/U.FL6x PWM outputsRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: 12dbmReceiver protocol: PWM or CRSFInput voltage: +5v~8.4vPCB size: 19mm x 17.5mmWeight: 1.49g / antennaFirmware:Target option1: Generic ESP8285 6xPWM 2.4Ghz RX  PWM receiver via 1~6 PWM outputsTarget option2:HappyModel_EP_2400_RXCRSF Serial receiver via TX and RXFirmware...

Happymodel ExpressLRS module V2 ES900TX/ES900RX Long range ELRS hardware 915mhz support instead ES915TX/ES915RX Notice: The New version ExpressLRS hardware 868MHz/900MHz TX and RX module—ES900TX and ES900RX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the...

Happymodel Moblite6 1S 65mm Ultra light Brushless Whoop FPV Racing Drone Specifications:Brand Name: HappymodelItem Name: Moblite6 1S 65mm ultra light brushless whoopWheelbase: 65mmSize: 80mm*80mm*25mmWeight: 18.5g (without battery)Weight:26g(with Original 1s 300mah Lipo battery ) Features:The lightest 1s 65mm brushless whoopPowerful and efficiencyThe lightest 1s AIO...

Happymodel Moblite7 1S 75mm Ultra-light Brushless Whoop FPV Racing Drone   Specifications:Brand Name: HappymodelItem Name: Moblite7 1S 75mm ultra light brushless whoopWheelbase: 75mmSize: 97mm*97mm*25mmWeight: 19.5g (without battery)Weight:36g(with Original 1s 650mah Lipo battery ) Features:The lightest 1s 75mm brushless whoopPowerful and efficiencyThe lightest 1s AIO...

  Specifications:Brand Name: HappymodelModel: Moblite7 HDZEROFrame wheelbase: 75mmWeight: 29.5 gram without batterySize: 98mm*98mm*50mmReceiver option:SPI ELRS 2.4GHzSPI FRSKY 2.4GHzCompatible with 1S Lipo battery or Lihv batteryBattery Plug: PH2.0 Flight controllerSuperbeeF4 Lite ELRS/FRSKYSPI ELRS version Firmware target: CrazybeeF4SX1280SPI FRSKY version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor:...

Specifications:Brand Name: HappymodelModel: Moblite7 WalksnailFrame wheelbase: 75mmWeight: 33.5 gram without batterySize: 98mm*98mm*48mmReceiver option:SPI ELRS 2.4GHzSPI FRSKY 2.4GHzCompatible with 1S Lipo battery or Lihv batteryBattery Plug: PH2.0 Flight controllerSuperbeeF4 Lite ELRS/FRSKYSPI ELRS version Firmware target: CrazybeeF4SX1280SPI FRSKY version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHz, 512K FLASH)Sensor: MPU-6000...

The flight controller updated to CrazybeeF4 Lite v3.1 since 17th Feb 2022 ,please check the update log Notice: The flight controller of DSM2/DSMX version Mobula6 has been updated to be CrazybeeX DXS V1.0 after Dec.9th 2020 , it has built-in DSM2/DSMX spi receiver , so...

In stock now, Welcome to place order!(2024/4/24) Mobula6 2024 1S 65mm Ultra Light Micro FPV Whoop BNF 2.4GHz ExpressLRS Receiver 5.8G Openvtx Features:AIO Flight controller with Serial ELRS Receiver and 5.8G OpenvtxSuper light 1S 65mm Brushless whoop only 17.7gEquipment with the lightest brushless motors-SE0702...

Happymodel Mobula6 ECO 2024 1S 65mm HDZero Ultra Light Micro FPV Whoop Drone ETA: Around Early April Features:AIO Flight controller with Serial ELRS ReceiverCompatible with HDZERO systemEquipment with the lightest brushless motors-SE0702 only 1.49gramHDZERO NEW ECO VTX and Camera readySmooth and powerfulCompatible for 1S...

FPV Brushless Whoop Drone Happymodel Mobula6 ELRS Overview ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Now we are about to release Mobula6 equipped with...

Happymodel Mobula6 ELRS 1s 65mm Frame Green(Pack of 2) The frame is for Happymodel Mobula6 ELRS Racing Drone Package Included:2*65mm Frame

Happymodel Mobula6 HD 65mm Crazybee F4 Lite 1S Whoop FPV Racing Drone BNF w/ Runcam Split3-lite 1080P HD DVR Camera Compatible Frsky D8 Receiver Specifications:Brand Name: HappymodelItem Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF versionWheelbase: 65mmSize: 80mm*80mm*40mmWeight: 27gReceiver option:Internal SPI Frsky...