0-30 USD Products

2pcs Happymodel Bwhoop65 65mm Brushless Tiny Whoop Frame Kit For Micro FPV Racing Drone Description:Bwhoop65 is a high performance Brushless Tiny whoop Frame for Indoor FPV, light weight and durable. Compatible most 0603 brushless motor, like Racerstar0603, Boldclash0603, Happymodel 0603, Betafpv0603 etz.. Specifications:Brand name: HappymodelItem...

Crazybee F3 Flight Controller – Built-in OSD & 4-in-1 ESC (Frsky/Flysky/DSMX) The Crazybee F3 is the ultimate 1S Tiny Whoop brushless flight controller, combining a 4-in-1 ESC, receiver, OSD, and current meter in a compact 28.5×28.5mm board. Perfect for micro brushless racing drones, it...

Happymodel 2.4g ExpressLRS ELRS nano series receiver module PP RX/ EP1 RX/ EP2 RX Notes:Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the...

Happymodel 2.4g ExpressLRS ELRS TX module ES24TX-Lite for T-lite Introduction：Specific Lite 2.4GHz ExpressLRS TX module for Jumper T-lite is coming out now.This Lite TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and...

Happymodel 3K Carbon Fiber Glass Frame for Crux3 Specification:Brand Name: HappymodelWheelbase: 115mmWeight: 5.8gThickness: 2.5mm Package Included:1*frame

Happymodel 65mm Frame for Mobula6 2024 / Mobula6 ECO 2024 Features:Mobula6 2024 new frame is a ultra lighter65mm size Brushless Tiny whoop Frame.Compatible most of the 0603/0702/0802 brushless motor. It’s very soft and durable. Specifications:Wheelbase:65mmWeight:2.8gColor option: Transparent black and Transparent whiteRecommend part list:Propellers: 31mm...

Happymodel 75mm V4 Upgrade Whoop Frame for Moblite7 Mobula7(Pack of 2) Features:Does not block the USB PortLower FC Mount positionMore durableUltralightSpecification:Compatible with: Moblite7 and Mobula7Brand Name: HappymodelColor: Transparent WhiteMax propeller: 40mmWheelbase: 75mmWeight: 5.4gram Package Included:2*V4 Frame

Happymodel New 85mm Mobula8 frame durable, low position FC mountedSpecifications:Brand Name: HappymodelWheelbase: 85mmWeight: 11.5gramColor: Transparent blackMax propeller: 51MMSuitable both 3 hole mount 702/703/802/1102 motors and 4 hole 1002/1102/1103 motors Package Included:2* 85mm Mobula8 frame

Happymodel Camera Canopy for Crux3 & Mobula8 Description:Brand Name: HappymodelItem Name: Camera Canopy for Crux3 & Mobula8Material: ABSColor option: Transparent blackCompatible with CaddxFPV ANT cameraNet Weight: 1.2gPackage Included:1 x Camera Canopy2 x Screws for Caddx FPV ANT

Specification:Item Name: Camera Canopy for Mobula6Material: PPNet Weight: 1gCamera angle could adjustable easilyColor option:White,Black Package Included:1*Camera Canopy

Happymodel Camera mount bracket for Mobula6 2024 Specification：Brand Name: HappymodelItem Name: Camera mount bracket for Mobula6 2024Material: PPColor option: Transparent blackNet Weight: 0.62gCamera angle could adjustable easilyBest for Mobula6 2024 Package Included:1 x Camera mount bracket2 x M1.2×5 screws

The World first true diversity 2.4 GHz ExpressLRS Rx with RF amps Remark:The EP1 Dual Receiver has update new version. Specification:Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RXESP32 PICO D4, dual SX1280(SX1281)Antenna connector: IPEX MHF 1/U.FLRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: >19dbmReceiver protocol: CRSFInput voltage: +5V DC @ “+” padPCB size: 19mm x 14mmWeight: 1gram exclude antenna Firmware:ExpressLRS v3.0.0 rc1 or latest versionTarget: Unified_ESP32_2400_RX, Append configuration -Generic ESP32 2.4Ghz Diversity RX(EP1 Dual target will be available soon)Firmware update via UART or WIFI Package Included:1*EP1 Dual Receiver2*Antenna

This is a nano sized receiver for the ExpressLRS ELRS system.   The EP1 TCXO uses a temperature conpensated crystal oscillator which means accurate MCU clock frequency for improved performance and reliability of your RC link. The EP1, EP2, and EP1Dual modules are based on...

Happymodel ES900 DUAL RX ELRS Diversity Receiver 915MHz 868MHz Long Range Receiver Specification:Type: 915MHz/868MHz true diversity receiverESP32 PICO D4, dual SX1276Antenna connector: IPEX MHF 1/U.FLRF Frequency: 915MHz or 868MHzTelemetry power: 17dbmReceiver protocol: CRSFInput voltage: +5V DC @ “5v” padPCB size: 21.5mm x 16mmWeight: 1.5gram exclude...

Specifications:Item: Happymodel EPW6 TCXO 2.4GHz pwm receiverESP8285, SX1280/1281Antenna connector: IPEX MHF 1/U.FL6x PWM outputsRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: 12dbmReceiver protocol: PWM or CRSFInput voltage: +5v~8.4vPCB size: 19mm x 17.5mmWeight: 1.49g / antennaFirmware:Target option1: Generic ESP8285 6xPWM 2.4Ghz RX  PWM receiver via 1~6 PWM outputsTarget option2:HappyModel_EP_2400_RXCRSF Serial receiver via TX and RXFirmware...

Happymodel ExpressLRS module V2 ES900TX/ES900RX Long range ELRS hardware 915mhz support instead ES915TX/ES915RX Notice: The New version ExpressLRS hardware 868MHz/900MHz TX and RX module—ES900TX and ES900RX coming out which is instead ES915TX and ES915RX due to shortage of SMT32 chips. ExpressLRS development will release the...

Happymodel Mobula6 ELRS 1s 65mm Frame Green(Pack of 2) The frame is for Happymodel Mobula6 ELRS Racing Drone Package Included:2*65mm Frame

Specifications:Brand Name: HappymodelMaterials: PAWeight: 5gColor: blackSuitable for mount DJI o3 Air unit and Vista module Package Included:1X Mount bracket

Happymodel Moxon 2.4GHz Antenna for ExpressLRS TX Module SMA Plug for ES24TX Series TX Specification:Frequency (MHz):2400.0Efficiency (dBi):-2.94Gain (dBi):4.18Efficiency (%):50.77Directivity (dB):7.12Peak Gain Position (Theta):0.00Peak Gain Position (Phi):270.00Weight(gram): 5.83Length(mm)*width(mm):69*45Plug type: SMA Package Included:1*Moxon 2.4GHz antenna

Happymodel OVX300 and OVX303 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) OpenVTx aims to provide firmware with both the SmartAudio and Tramp protocols. Either protocol can be used on the flight controller and on VTx power up...